Pride Go Go Elite Traveller Gen 3 SC443E Mobility Scooter - Iceberg Blue

This listing selects the Iceberg Blue finish for the Go Go Elite Traveller Gen 3. The color option changes its appearance, while the model configuration and operating characteristics described below remain those of this exact parent model.

This FDA Class II medical device is designed to aid individuals with mobility impairments. Specifications may change, and speed and range vary with rider load, terrain and battery condition. HCPCS references do not guarantee reimbursement.

More useful foot room in a travel footprint

The Go Go Elite Traveller Gen 3 addresses a familiar compromise in compact mobility scooters: fitting your feet comfortably without moving to a much larger machine. Its redesigned deck combines a flat standing area with a sloped area near the front wheels, giving the rider more choice in foot placement. This is the four-wheel SC443E, not the earlier Elite Traveller three-wheel or the Platinum version.

Pride's EZ Turn steering provides a 39.2-inch turning radius in a scooter measuring 41.5 inches long and 19.45 inches wide. That makes the Gen 3 interesting for shopping aisles, lobbies and other places where a conventional four-wheel travel scooter can require more reversing. Four wheels do not remove the need to slow down at corners, and a turning-radius figure is not a guarantee of access through every doorway.

Disassembly and the real lifting requirement

Feather-touch disassembly separates the scooter into five pieces. The front section is the heaviest at 36.2 pounds, while the standard mesh-back seat weighs 23 pounds. This arrangement can be easier to distribute around a trunk than a one-piece folding scooter, but it adds an assembly routine at the destination. There must also be room to stand and handle the components beside the car.

The complete scooter weighs 83.6 pounds without batteries, approximately 103 pounds with the 12Ah batteries and 111 pounds with the 18Ah option. Those assembled figures matter when considering a platform lift, whereas the front-section weight matters for manual loading. The larger battery pack adds weight even though the frame does not change. Compare your lifting ability with the whole loading sequence, including the seat and battery pack, rather than only the advertised heaviest piece.

Seating and controls that affect daily use

The 17-by-17-inch mesh-back seat combines a compact travel cushion with a more breathable backrest. The seat-to-deck height range is 16.38 to 17.83 inches. That adjustment changes knee position, but cannot turn a compact seat into a broad captain's chair. Check both the cushion dimensions and the space available for your shoes when seated; weight capacity alone does not establish comfortable fit.

The angle-adjustable delta tiller lets you position the wraparound handles closer to your preferred reach. A built-in charging port reduces the need to reach down to the battery area for ordinary charging. This standard Gen 3 should not be confused with Platinum's Charge360 magnetic connection and foot-operated tiller adjustment. Regenerative and electromechanical brakes control stopping; practice the response of the forward and reverse controls at a low speed before using the scooter in confined places.

Battery choices change distance and handling

The standard 12Ah system is rated for up to 7.1 miles at 300 pounds or 8.9 miles at 220 pounds. With the optional 18Ah batteries, the corresponding figures are up to 11.3 and 14.1 miles. These are not four interchangeable claims for the same setup. The larger pack makes sense for longer outings, but brings extra lifting weight and should be selected deliberately rather than assumed to be included.

Both systems use two 12-volt sealed lead-acid deep-cycle batteries, with a 2-amp off-board charger specified for this model. Allow range reserve for slopes, frequent stopping and battery aging. A rider planning a long sightseeing day needs to consider the return trip and charging access, not simply the longest number in the table. The battery meter is an operating aid, not a precise remaining-mileage calculation.

Equipment and sensible surface limits

A large front basket and front and rear pathway lights are standard. Cardinal Red shrouds are supplied in Pride's standard configuration; other accessory colors are separate choices. These conveniences are useful without changing the scooter's basic travel character. Top speed is up to 4.23 mph and capacity is 300 pounds, suitable for pedestrian-paced outings rather than fast outdoor touring.

The solid tires avoid puncture-related air loss, but there is no suspension. Clearance is 3.5 inches under the deck and just 1.29 inches at the motor, so a high deck should not encourage curb climbing or rough-ground shortcuts. Smooth indoor flooring and maintained paved routes are its stronger setting. Choose the Gen 3 for foot space, manageable component loading and tighter four-wheel turning; choose a larger suspended scooter if seating support or repeated uneven-surface travel is the more important requirement.

* Pride Mobility FDA Class II Medical Devices are designed to aid individuals with mobility impairments.