MU-1 12V 31.6AH GEL Battery ( Sold in pairs )
Mobility Batteries(Model No. MU-1 SLD G)
Starting at: $389.00 USD
Key Features
- Superior Cycle Life: Averaging approximately 1,000 cycles at a 50% depth of discharge (DOD).
- Maintenance-Free Gel Design: The sealed, valve-regulated construction (VRLA) uses a thickened thixotropic gel electrolyte, eliminating the need for periodic watering and preventing corrosive acid fumes or spills.

- Superior Cycle Life: Averaging approximately 1,000 cycles at a 50% depth of discharge (DOD).
- Maintenance-Free Gel Design: The sealed, valve-regulated construction (VRLA) uses a thickened thixotropic gel electrolyte, eliminating the need for periodic watering and preventing corrosive acid fumes or spills.
(Model No. MU-1 SLD G)
Starting at: $389.00 USD
MSRP: $469.00
SAVINGS: $80.00 
SAVE W/ TOP MOBILITY!
Couldn't load pickup availability
MK Battery MU-1 12V 31.6AH GEL Batteries
End Your Battery Worries with MK Battery MU-1 12V 31.6AH GEL Batteries
Are you tired of replacing unreliable, short-lived batteries that stall your equipment and disrupt your peace of mind? Constant battery failures can halt essential activities, whether you’re operating mobility devices, backup systems, or critical equipment. This not only leads to unexpected downtime but also adds unnecessary stress to your daily life or business operations.
The MK Battery MU-1 12V 31.6AH GEL Batteries are designed as the ultimate solution to your power challenges. Experience the difference with:
-
Superior Cycle Life: These batteries offer an impressive average of 1,000 cycles at 50% depth of discharge, giving you longer-lasting, more reliable power.
-
Maintenance-Free Gel Design: The sealed VRLA construction with a thickened thixotropic gel electrolyte means no more pouring water and no risk of corrosive spills or fumes.
-
Consistent Performance: Get dependable energy for your essential devices and equipment, ensuring they’re ready when you need them most.
Customers routinely share stories of uninterrupted operation and stress-free ownership, praising the MK Battery MU-1 12V 31.6AH GEL Batteries for their outstanding reliability over time.
Don’t let battery issues slow you down. Upgrade to MK Battery MU-1 12V 31.6AH GEL Batteries today for dependable, hassle-free power that keeps your life or business running smoothly.
Key Features & Benefits: Solutions and Results
-
Averages 1,000 cycles at 50% DOD for extended battery life
-
Zero-maintenance, sealed gel design for safety and convenience
-
Reliable, consistent performance in a wide range of applications
|
GEL Battery
Dimensions:
GEL vs. AGM Sealed Batteries AGM (absorbed glass mat) is a special design glass mat designed to wick the battery electrolyte between the battery plates. AGM batteries contain only enough liquid to keep the mat wet with the electrolyte and if the battery is broken no free liquid is available to leak out. Gel Cell batteries contain a silica type gel that the battery electrolyte is suspended in, this thick paste like material allows electrons to flow between plates but will not leak from the battery if the case is broken. More often than not an AGM Batteries are mistakenly identified as a Gel Cell Batteries. Both batteries have similar traits; such as being non spillable, deep cycle, may be mounted in any position, low self discharge, safe for use in limited ventilation areas, and may be transported via Air or Ground safely without special handling. AGM Batteries outsell Gel Cell by at least a 100 to 1. AGM is preferred when a high burst of amps may be required. In most cases recharge can be accomplished by using a good quality standard battery charger or engine alternator. The life expectancy; measured as cycle life or years remains excellent in most AGM batteries if the batteries are not discharged more than 60% between recharge. Gel Cell Batteries are typically a bit more costly and do not offer the same power capacity as do the same physical size AGM battery. The Gel Cell excels in slow discharge rates and slightly higher ambient operating temperatures. One big issue with Gel Batteries that must be addressing is the CHARGE PROFILE. Gel Cell Batteries must be recharged correctly or the battery will suffer premature failure. The battery charger being used to recharge the battery(s) must be designed or adjustable for Gel Cell Batteries. If you are using an alternator to recharge a true Gel Cell a special regulator must be installed. If you are unsure which battery or charger is best for your application, please call or email our tech people for help making the correct selection. |
No product documentation available at this time.
12 Month Full Replacement Warranty with Receipt
No shipping/returns information available at this time.
