AI Product Insights
by
M17 12V 18AH AGM Battery ( Sold in pairs )
Mobility Batteries(Model No. M17-12 SLD M)
Starting at: $199.00 USD
Key Features
- Deep Cycle Performance: Capable of up to 550 cycles at 50% Depth of Discharge (DOD).
- Maintenance-Free & Spill-Proof: A completely sealed VRLA design that never needs water added and is safe to use in any position (except upside down).
- High Burst Power: Prefers high discharge rates and can provide high bursts of amps when needed, outperforming Gel batteries in high-current delivery.
- Deep Cycle Performance: Capable of up to 550 cycles at 50% Depth of Discharge (DOD).
- Maintenance-Free & Spill-Proof: A completely sealed VRLA design that never needs water added and is safe to use in any position (except upside down).
- High Burst Power: Prefers high discharge rates and can provide high bursts of amps when needed, outperforming Gel batteries in high-current delivery.
(Model No. M17-12 SLD M)
Starting at: $199.00 USD
Couldn't load pickup availability
MK Battery M17-12 SLD M 12V 18Ah AGM Batteries, Pair
This listing supplies two MK Battery M17-12 SLD M batteries, each rated at 12 volts and 18 amp-hours. The sealed AGM design is described for deep-cycle use and higher current demands. MK lists up to 550 cycles at 50% depth of discharge; actual service life depends on the equipment, charging routine, temperature and depth of discharge. The pair's total electrical output depends on how the device connects the batteries.
Match Chemistry and Equipment
Confirm the device requires the M17-12 SLD M AGM model and two batteries. Check the case dimensions, tray, terminals and orientation, cable reach and hold-downs before ordering. Similar voltage or capacity does not make this AGM model interchangeable with a gel battery or another M17 variant.
Charging and Use
Use the device manufacturer's approved charging profile for AGM batteries. The sealed valve-regulated construction does not require routine watering, but the charger and battery still need to be compatible. Follow the equipment manual for wiring, polarity, charging and storage, and do not apply gel-battery settings unless the equipment maker specifies them for this model.
Pair Quantity and Installation Service
The product is sold as two batteries for equipment that specifies a pair. Connect them in the equipment's stated series or parallel arrangement; do not infer system capacity by adding label values without checking the wiring. Optional installation service covers labor dispatch and battery installation only, is non-refundable and may carry a distance-based fee. Confirm coverage before selecting it.
Before Ordering
Verify the M17-12 SLD M model, per-unit 12V/18Ah rating, AGM chemistry, pair quantity, terminal fit and charger profile. Use this battery only where the equipment's specification calls for it.
|
Battery Type: AGM Voltage: 12V Amp Rating: Capacity at 5hr RATE 12AH Capacity at 20hr RATE 15.3AH Capacity at 100hr RATE 18AH Dimensions:
Reserve Capacity 30 minutes Maximum Discharge Current for 30 seconds : 360A Maximum Discharge Current for 5 seconds : 720A Operating Temperature Range Charge 0°C(32°F) to 40°C (104°F) Discharge -15°C(5°F) to 50°C (122°F) Storage -15°C(5°F) to 40°C (104°F) Charge Retention (shelf life) at 20°C (68°F) 1 month 92% 3 month 90% 6 month 80% Charging Methods at 25°C (77°F) Cycle use : Charging Voltage 14.4 to 15.0V Maximum Charging Current 5.4A Standby use : Float Charging Voltage 13.50 to 13.80V No current limit required Life expectancy : Cycle Use : 100% depth of discharge 250 cycles 80% depth of discharge 350 cycles 50% depth of discharge 550 cycles Standby Use : 3~5 years Case Material ABS (94-HB & 94V-0 flame retardant case)Terminal F3 GEL vs. AGM Sealed Batteries AGM (absorbed glass mat) is a special design glass mat designed to wick the battery electrolyte between the battery plates. AGM batteries contain only enough liquid to keep the mat wet with the electrolyte and if the battery is broken no free liquid is available to leak out. Gel Cell batteries contain a silica type gel that the battery electrolyte is suspended in, this thick paste like material allows electrons to flow between plates but will not leak from the battery if the case is broken. More often than not an AGM Batteries are mistakenly identified as a Gel Cell Batteries. Both batteries have similar traits; such as being non spillable, deep cycle, may be mounted in any position, low self discharge, safe for use in limited ventilation areas, and may be transported via Air or Ground safely without special handling. AGM Batteries outsell Gel Cell by at least a 100 to 1. AGM is preferred when a high burst of amps may be required. In most cases recharge can be accomplished by using a good quality standard battery charger or engine alternator. The life expectancy; measured as cycle life or years remains excellent in most AGM batteries if the batteries are not discharged more than 60% between recharge. Gel Cell Batteries are typically a bit more costly and do not offer the same power capacity as do the same physical size AGM battery. The Gel Cell excels in slow discharge rates and slightly higher ambient operating temperatures. One big issue with Gel Batteries that must be addressing is the CHARGE PROFILE. Gel Cell Batteries must be recharged correctly or the battery will suffer premature failure. The battery charger being used to recharge the battery(s) must be designed or adjustable for Gel Cell Batteries. If you are using an alternator to recharge a true Gel Cell a special regulator must be installed. If you are unsure which battery or charger is best for your application, please call or email our tech people for help making the correct selection. |
No product documentation available at this time.
12 Month Full Replacement Warranty with Receipt
No shipping/returns information available at this time.
