WheelChair Carrier XL4 Extra-Large Electric Hitch Lift

The XL4 is a powered exterior lift for transporting a compatible mobility device on a 48 x 34 inch usable platform. WheelChair Carrier lists a 350 lb device capacity and a lift weight of 106 lb. The platform automatically folds into a stowaway position when empty, while retractable ratchets are listed for securing the device. This combination is intended for larger devices that need a broad platform, but the lift's size and weight make vehicle and hitch planning essential.

Verify Device Fit and Securement

Measure the mobility device in its travel configuration, including wheelbase, overall width and length, footrests, tiller or controls and any accessories that project beyond the frame. Compare those measurements with the 48 x 34 inch usable platform; being under the 350 lb capacity does not guarantee that the device will fit or can be positioned securely. The manufacturer lists retractable ratchets, but the store's included-items information gives a different strap count. Confirm the supplied securement hardware with the seller before ordering and follow the XL4 manual for placement and tension.

Folding, Clearance and Route Planning

The platform folds into a stowaway position when unloaded. WheelChair Carrier lists up to 24 inches of possible ground clearance, but installed clearance depends on the vehicle, receiver height, suspension and load. Check the lift through the entire operating path and over the driveway transitions the vehicle will encounter. The carrier's 106 lb weight and the loaded device extend behind the vehicle, affecting parking, backing, garage access and the vehicle's rear overhang.

Receiver and Vehicle Load Limits

The XL4 accommodates 1 1/4 inch or 2 inch square hitch receivers and includes a 21 ft wire harness with a 30 amp resettable circuit breaker. Confirm that the receiver size matches the vehicle's actual hitch and that the mounting arrangement and wiring are appropriate for the installation. Include the lift, device, passengers and other cargo in vehicle payload calculations, and check receiver and tongue-weight ratings. The manufacturer warns not to exceed the hitch manufacturer's recommended towing capacity; the lift's 350 lb capacity does not replace those vehicle limits.

Before Purchase and Use

Confirm platform fit, securement details, receiver size, wiring, installed clearance and the combined load with WheelChair Carrier or a qualified installer. Use the lift only for an unoccupied mobility device, and follow the owner's and installation manuals for loading, securement and travel. The XL4 is best assessed as a complete lift/vehicle/device combination, not by platform size alone.