Model 003 Fixed Wheelchair Carrier

The Model 003 Tote is a fixed hitch carrier for a folding manual wheelchair. Its simple arrangement has an important trade-off: unlike the WC-001 tilt carrier, this model does not lower to the ground for roll-on loading and does not fold away when empty. The wheelchair must be lifted onto the carrier, and the carrier stays attached behind the vehicle between trips. That may suit an owner who can manage the lift and prefers a fixed rack over a tilting mechanism, but it is not the right choice when ground-level loading is required.

Published Fit and Capacity

The listing gives a 75 lb carrier capacity, a carrier weight of 16 lb, and a maximum wheelchair width of 15.5 inches. The capacity is the limit for the wheelchair load, not a target to exceed; compare the wheelchair's actual weight with the rating. The listing describes attachment to a ball mount or drawbar and fit with Class I, II or III hitches.

Measure the Folded Chair

Check the chair's folded width and overall shape, including footrests, wheels, push handles or accessories that remain in place. Width alone does not confirm that the folded chair can sit properly on the carrier. Confirm how the wheelchair is secured and whether its frame and attachment points are appropriate for this arrangement. This model is for a folding manual wheelchair, not a scooter or powerchair.

Check the Vehicle Combination

Before ordering, verify the ball mount or drawbar, receiver class, hitch rating and vehicle limits. The carrier and wheelchair add weight behind the vehicle; account for tongue-weight limits and total payload, including occupants and cargo. Confirm the product's mounting and securement instructions with the seller and wheelchair manufacturer. The fixed design is straightforward, but a safe fit still depends on the exact chair, carrier and vehicle combination.