AI Product Insights
by
Harmar AL160 Profile Fully Powered Mobility Scooter Vehicle Lift
(Model No. HAR-AL160)
Starting at: $2,430.00 USD
Key Features
- Scooter-specific wheelbase fit: The AL160 accommodates compatible scooters with wheelbases from 30 to 42 inches, providing an exterior transport platform without modifying the scooter itself.
- Powered lifting and folding: Powered operation raises the scooter into its transport position and folds the unloaded platform, reducing the manual handling required between trips.
- Scooter-specific wheelbase fit: The AL160 accommodates compatible scooters with wheelbases from 30 to 42 inches, providing an exterior transport platform without modifying the scooter itself.
- Powered lifting and folding: Powered operation raises the scooter into its transport position and folds the unloaded platform, reducing the manual handling required between trips.
(Model No. HAR-AL160)
Starting at: $2,430.00 USD
Couldn't load pickup availability
Harmar AL160 Profile Powered Scooter Hitch Lift
The AL160 is an exterior hitch-mounted lift for a compatible power scooter. Harmar specifies a scooter wheelbase from 30 to 42 inches and a maximum device weight of 350 lb. The powered system raises and folds the carrier, providing a loading routine without requiring modifications to the scooter itself. Its value depends on matching that exact wheelbase range and the installed vehicle; the 350 lb capacity alone does not confirm platform fit or vehicle suitability.
Check the Scooter's Wheelbase and Weight
Measure the scooter from axle to axle in the configuration that will be carried, and confirm that the device is within both the 30–42 inch wheelbase range and the 350 lb limit. Also check the scooter's full width and length, where it contacts the carrier and how it will be secured. A scooter can meet the weight rating and still fall outside the lift's wheelbase or fit requirements. Confirm the exact model and any seat or accessory setup with Harmar or the dealer before ordering.
Powered Lifting and Folding
The AL160 lifts the scooter on an exterior platform and folds when not in use. Follow the manual's sequence for loading, securing, raising and folding, and transport the scooter unoccupied. Check that the scooter is positioned and held as the manufacturer instructs before moving the vehicle. If a swing-away option is being considered, verify that it is compatible with the selected vehicle and installation rather than assuming it will work with every receiver setup.
Vehicle and Hitch Compatibility
Harmar lists minivans, SUVs, trucks and vans as vehicle categories, but installation and load ratings are vehicle-specific. Confirm receiver size, hitch rating, tongue-weight limit, vehicle payload and ground clearance with Harmar's vehicle calculator or a dealer. Include the lift, scooter, passengers and cargo in the load calculation. The added rear length can affect backing, parking, driveway transitions and garage entry, even when the lift is folded.
Before Purchase and Use
Provide the scooter's model, wheelbase, weight and dimensions along with the vehicle year/model and hitch details. Ask the dealer to verify lift fit, securement, electrical installation and any swing-away selection. Review the AL160 owner's and installation manuals before use. The lift carries an unoccupied scooter; it is not designed to lift or transport a person.
Lifting Capacity 350 lbs.
Platform Size 27.5' x 23'
Lift Weight 69 lbs.
Hitch Height (range) 5'-18'
Hitch Class I, II or III
Warranty 3-Year Transferrable
Ownership Information
Warranty Information
Components: 3 Years
Shipping / Returns Information
If you have questions about this item please call a Top Mobility Customer Service Expert at 1-888-364-3813.
