-
Challenger Mobility Dual Cane Holder
by Challenger Mobility
Challenger JDCH dual cane/crutch holder with two 2-inch tubes and included retaining pin. Requires a matching 1 x 1-inch square rear receiver.
Key Features- Two walking-aid tubes: The Challenger JDCH metal carrier has two two-inch-diameter tubes, allowing a pair of appropriately sized canes or crutches to travel behind the seat.
- Retaining pin included: An included retaining pin secures the holder in a matching one-by-one-inch square rear receiver, provided the seat and frame leave enough clearance.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Patriotic Large Deluxe Armrest Bag
by Challenger Mobility
Challenger J250P patriotic armrest bag with a flag emblem, zippered and mesh pockets, water-resistant nylon and straps that help limit swinging.
Key Features- Flag-emblem pocket storage: The Challenger J250P bag combines an American flag emblem with a front zippered compartment, mesh pocket and additional pockets for organized armrest-side storage.
- Stabilized strap mounting: Hook-and-loop armrest straps and a lower frame or seat-post strap help limit swinging, while the water-resistant nylon adds a practical layer for everyday use.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Plastic Bottle Holder for Scooters, Rollators, and More!
by Challenger Mobility
Challenger JPCH300 ABS-plastic holder for 12 oz. bottles with an adjustable no-slip clamp. Check tiller diameter, bottle clearance and control access.
Key Features- Twelve-ounce bottle storage: The Challenger JPCH300 holder is sized for a 12-ounce bottle and uses ABS plastic, providing a dedicated drink location on a suitably matched tiller or handle.
- Adjustable clamp attachment: A no-slip clamp tightens with a knob around the mounting bar, allowing placement where the holder and bottle leave steering and controls clear.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Pride Mobility Scooter Keys (KEYSCO1007)
by Pride Mobility TECH
Pride KEYSCO1007 replacement scooter keys supplied as a set of two. Match the key code and scooter model or serial before ordering.
Key Features- Specific Pride key code: These replacement keys are identified as Pride KEYSCO1007, helping distinguish the correct key pattern from other Pride scooter key numbers.
- Two-key set: The retailer specifies a set of two keys, providing a spare once the code and scooter model or serial are confirmed against the original parts information.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Go Chair Battery Pack Assembly
by Pride Mobility
Accessories
Pride Go Chair BAT155865 removable battery pack with an integrated handle and off-board charging. Confirm the chair generation, connector and charger fit.
Key Features- Removable battery assembly: The Pride Go Chair BAT155865 pack has an integrated handle, making the correctly matched battery assembly easier to remove from the chair.
- Off-board charging: The pack supports charging away from the chair, providing another charging-location option once the model, connector and charger compatibility are confirmed.
Free Shipping On all orders over $50 across the USAIn-Home Service Free 1 year in-home service planLifetime Support Expert help whenever you need it -
Challenger Mobility Joystick Weather Cover for Power Wheelchairs
by Challenger Mobility
Challenger J610 joystick cover with urethane-coated nylon, a clear viewing window and adjustable hook-and-loop strap. Check joystick clearance and hand access.
Key Features- Moisture-resistant control cover: The Challenger J610 uses urethane-coated nylon around the powerchair joystick, with a clear plastic window for viewing the controls.
- Adjustable strap opening: A hook-and-loop strap adjusts around the joystick and armrest, allowing the opening to be fitted while retaining hand access and free control movement.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Universal Scooter Cover
by Challenger Mobility
Challenger T300 ripstop-nylon scooter storage cover with zipper and hook-and-loop expansion panels. Measure for fit; not for vehicle-lift transport.
Key Features- Expandable ripstop construction: The Challenger T300 cover uses ripstop nylon with zipper and hook-and-loop expansion panels to adjust its available room around a matching scooter.
- Stationary storage use: The cover is intended for a parked scooter in storage, helping keep it clean; it is not made for transport on a vehicle-mounted lift.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
12V 12AH SLA Battery ( Sold in pairs )
by Interstate Batteries
Mobility Batteries
12V 12AH SLA Battery features voltage and capacity and AGM technology.
Key Features- Voltage and Capacity: It provides a nominal 12 Volts with a 12 Amp Hour (Ah) capacity, delivering reliable power for both float (standby) and cyclic applications.
- AGM Technology: Utilizes Absorbent Glass Mat (AGM) technology, where the electrolyte is suspended in fiberglass mat separators.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility 24V 5AH Lead Acid Battery Charger
by Challenger Mobility
Challenger EMC180 24V SLA charger with fan cooling, three-stage charging, three-pin plug and automatic shutoff. Not for 48V systems; confirm fit.
Key Features- Fan-cooled SLA charging: The Challenger EMC180 uses fan cooling and three-stage charging for a matching 24V sealed lead-acid battery system, with an off-board unit and U.S. power cord.
- Automatic completion control: Automatic shutoff is paired with a round three-pin scooter connection; this charger is not for 48V systems, and battery chemistry and plug polarity must match.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Scooter and Power Chair Cane Clips
by Challenger Mobility
Challenger J2CC metal cane-clip pair mounts beneath existing armrest screws to carry a cane beside the seat. Not compatible with Pride Go-Go scooters.
Key Features- Paired metal cane clips: The Challenger J2CC pair holds a cane beside the seat, providing an alternative to a rear-receiver walking-aid carrier on a compatible device.
- Under-armrest screw mounting: The clips fit beneath the existing armrest screws for installation; verify screw spacing and clearance, and do not select them for Pride Go-Go scooters.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it
