The easy way to haul your mobility scooters today's most versatile alternative.Want to transport your mobility scooter but don't want the problems of pulling a trailer? Well, the Versa-Haul is the ultimate solution.
Simply roll your vehicle up the carrier's available ramp and use straps to secure, the bike rides safely behind your vehicle.
The VersaHaul Mobility Carrier XL is made of sturdy, 14 gauge steel. A high quality powder paint coating ensures protection against the elements. Manufactured with high precision techniques, VersaHaul is made with quality unparalleled. The VersaHaul VH-MS XL Mobility Scooter carrier is designed to fit class III or class IV and safely carry up to 500 pounds. Most class III hitches are rated for 500 lbs. Most class IV hitches are rated for 1000 lbs. Subtract the weight of the carrier to determine how heavy a mobility scooter can be carried. Your hauling weight may be limited by your vehicle's capacity to carry a load. An anti-tilt lock bracket which is included is designed to stabilize the carrier and minimize movement.
- 60 in. center folding ramp
- Ramp easily lock into a folded upright position with spring pull locks
- Ramp folds into a flat position when not in use
- Ramp can be removed
- Carrier tilts up when not in use.
- Carrier comes standard with class III hitch insert.
- 13 slots for tie down hooks
- Tough powder coat finish
- Tray has a 58.75 in. x 32.75 in. of carrying area
- Anti-tilt locking device
- Carrier tray
- Center folding ramp
- Ramp bracket
- Class III stinger sleave (2 in)
Approx. Shipping Wt.: 120 lbs.
Carrying Capacity Unit: 500 lbs.
Length of carrier tray: 60 in.
Width of carrier tray: 33 in.
Height of carrier tray: 6.5 in.
Length of ramp: 60 in.
Width of ramp: 32.6 in.
Die Cast Zinc versus Aluminum:
Compared to aluminum, zinc alloys can be harder and stronger, machine more easily, have superior pressure tightness, and have substantially better wear and bearing characteristics. Zinc alloys become viable choices when aluminum is inadequate in one of these areas. Although they are more expensive on a unit volume basis, castings are potentially cost competitive when aluminum castings require heat treatment, hard anodizing, epoxy impregnation, or bronze bushing inserts.
The warranty period is for 1 Year from the date of purchase
ALL WARRANTIES ARE VOID IF:
the carrier has been rented, used under abnormal conditions, or subjected to abuse, misuse, neglect, or improper maintenance.
All warranties should be handled at point of purchase unless other arrangements are made.
BNK, Inc. is not liable for any damage claim or liability cliam, personal or otherwise resulting from operation of this carrier in any way. All transportation charges for items returned for warranty evaluation and/or replacement are to be borne by the customer.
For one (1) year from the date of purchase, BNK, Inc. will repair or replace for the original purchaser, without charge, any part or parts are manufactured by BNK, Inc. and found, upon examination at our factory in Winamac, to be defective in materials and/or workmanship.
All transportation charges on parts submitted for replacement under this warranty must be borne by the purchaser. This warranty does not apply to parts not manufactured by BNK, Inc. Their manufacturer may warrant these items. This warranty does not apply to any part which has been damaged by accident, alteration, abuse, improper adjustment, normal wear, or any other cause beyond our control.
Use of replacement parts other than genuine BNK, Inc. parts may impair the safety of your machine and void this warranty.
THIS WARRANTY IS VOID UNLESS THE PRODUCT REGISTRATION CARD IS FILLED OUT COMPLETELY AND RETURNED TO THE FACTORY AT WINAMAC, IN. WITHIN TEN (10) DAYS OF PURCHASE.
OUR WARRANTY COVERS OUR PRODUCT FOR ONE YEAR. WE ARE NOT ABLE TO EXCHANGE USED VERSAHAUL CARRIERS FOR REFUNDS OR NEW CARRIERS.
- CUSTOMIZE & BUY