-
Challenger Mobility Joystick Weather Cover for Power Wheelchairs
by Challenger Mobility
Challenger J610 joystick cover with urethane-coated nylon, a clear viewing window and adjustable hook-and-loop strap. Check joystick clearance and hand access.
Key Features- Moisture-resistant control cover: The Challenger J610 uses urethane-coated nylon around the powerchair joystick, with a clear plastic window for viewing the controls.
- Adjustable strap opening: A hook-and-loop strap adjusts around the joystick and armrest, allowing the opening to be fitted while retaining hand access and free control movement.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Kayak Cart with Large Balloon Tires
by Challenger Mobility
Challenger Mobility Kayak Cart features balloon tires for soft ground and supported loading and hull contact.
Key Features- Balloon tires for soft ground: Two 12-inch low-pressure balloon tires spread the load over a wider contact area, helping move a compatible kayak or canoe across sandy launch approaches.
- Supported loading and hull contact: A padded V-shaped frame supports the hull, while the dual kickstand steadies the cart during loading and a tie-down strap holds the vessel in place.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Large Balloon Wheels for Folding Beach Cart or Kayak Cart (Set of 2)
by Challenger Mobility
Challenger Mobility Large features low-pressure shoreline traction and detachable balloon tire design.
Key Features- Low-pressure shoreline traction: Wide 12-inch air tires reduce towing resistance while rolling over soft sand, loose gravel, and mud on the way to a launch or beach access point.
- Detachable balloon tire design: The balloon tires detach from the Challenger cart frame, allowing a compatible cart setup to be separated for transport and stored in smaller pieces.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Oxygen Tank Holder for Scooters and Power Wheelchairs
by Challenger Mobility
Challenger Mobility D/E oxygen cylinder holder with adjustable D-tank support, thumb-screw retention and removable square-receiver mounting. Verify fit.
Key Features- D and E cylinder carrying: The Challenger Mobility oxygen holder accommodates D- and E-size cylinders, with an adjustment that helps secure the smaller D cylinder.
- Removable receiver mounting: The metal holder attaches at a compatible square accessory receiver and uses a thumb screw to secure the cylinder; confirm the mounting hardware and device fit.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Plastic Bottle Holder for Scooters, Rollators, and More!
by Challenger Mobility
Challenger JPCH300 ABS-plastic holder for 12 oz. bottles with an adjustable no-slip clamp. Check tiller diameter, bottle clearance and control access.
Key Features- Twelve-ounce bottle storage: The Challenger JPCH300 holder is sized for a 12-ounce bottle and uses ABS plastic, providing a dedicated drink location on a suitably matched tiller or handle.
- Adjustable clamp attachment: A no-slip clamp tightens with a knob around the mounting bar, allowing placement where the holder and bottle leave steering and controls clear.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Scooter and Power Chair Cane Clips
by Challenger Mobility
Challenger J2CC metal cane-clip pair mounts beneath existing armrest screws to carry a cane beside the seat. Not compatible with Pride Go-Go scooters.
Key Features- Paired metal cane clips: The Challenger J2CC pair holds a cane beside the seat, providing an alternative to a rear-receiver walking-aid carrier on a compatible device.
- Under-armrest screw mounting: The clips fit beneath the existing armrest screws for installation; verify screw spacing and clearance, and do not select them for Pride Go-Go scooters.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Universal Scooter Cover
by Challenger Mobility
Challenger T300 ripstop-nylon scooter storage cover with zipper and hook-and-loop expansion panels. Measure for fit; not for vehicle-lift transport.
Key Features- Expandable ripstop construction: The Challenger T300 cover uses ripstop nylon with zipper and hook-and-loop expansion panels to adjust its available room around a matching scooter.
- Stationary storage use: The cover is intended for a parked scooter in storage, helping keep it clean; it is not made for transport on a vehicle-mounted lift.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Warm Winter Fleece Lined Weather Poncho
by Challenger Mobility
Challenger J820 winter poncho with water-repellent outer fabric, fleece lining, drawstring hood and adjustable cuffs. Single-rider fit; check control clearance.
Key Features- Fleece-lined weather layer: The Challenger J820 winter poncho combines a water-repellent outer layer with cotton/polyester fleece lining to add warmth over the rider's clothing.
- Adjustable hood and cuffs: A drawstring hood, neck zip and button, and adjustable hook-and-loop cuffs help position the single-rider poncho while preserving the needed control clearance.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Weather Cover for Scooters
by Challenger Mobility
Challenger vinyl scooter storage cover with scratch-free backing, drawstring hem, reinforced grommet and reflective strip. Not for vehicle-lift transport.
Key Features- Vinyl stationary-storage cover: This Challenger scooter cover uses lightweight black vinyl with scratch-free backing and double-stitched seams for covering a correctly sized parked scooter.
- Secured hem and reflective strip: A drawstring hem and reinforced grommet help secure the cover, while a reflective strip adds visibility; it is not for vehicle-mounted lift transport.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Deluxe Armrest Bag
by Challenger Mobility
Mobility Accessories
Challenger J200 water-resistant 10 x 8 x 3-inch armrest bag with zippered storage, upper straps and a lower frame strap to help limit swinging.
Key Features- Water-resistant zippered storage: The Challenger J200 provides a 10-by-8-by-3-inch zippered storage bag in water-resistant material, keeping everyday items organized beside the armrest.
- Upper and lower strap support: Top hook-and-loop straps attach around a suitable armrest while a lower frame strap helps limit swinging, with inside or outside placement depending on clearance.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it
