-
Challenger Mobility Oxygen Tank Holder for Scooters and Power Wheelchairs
by Challenger Mobility
Challenger Mobility D/E oxygen cylinder holder with adjustable D-tank support, thumb-screw retention and removable square-receiver mounting. Verify fit.
Key Features- D and E cylinder carrying: The Challenger Mobility oxygen holder accommodates D- and E-size cylinders, with an adjustment that helps secure the smaller D cylinder.
- Removable receiver mounting: The metal holder attaches at a compatible square accessory receiver and uses a thumb screw to secure the cylinder; confirm the mounting hardware and device fit.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Dual Cane Holder
by Challenger Mobility
Challenger JDCH dual cane/crutch holder with two 2-inch tubes and included retaining pin. Requires a matching 1 x 1-inch square rear receiver.
Key Features- Two walking-aid tubes: The Challenger JDCH metal carrier has two two-inch-diameter tubes, allowing a pair of appropriately sized canes or crutches to travel behind the seat.
- Retaining pin included: An included retaining pin secures the holder in a matching one-by-one-inch square rear receiver, provided the seat and frame leave enough clearance.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Patriotic Large Deluxe Armrest Bag
by Challenger Mobility
Challenger J250P patriotic armrest bag with a flag emblem, zippered and mesh pockets, water-resistant nylon and straps that help limit swinging.
Key Features- Flag-emblem pocket storage: The Challenger J250P bag combines an American flag emblem with a front zippered compartment, mesh pocket and additional pockets for organized armrest-side storage.
- Stabilized strap mounting: Hook-and-loop armrest straps and a lower frame or seat-post strap help limit swinging, while the water-resistant nylon adds a practical layer for everyday use.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Plastic Bottle Holder for Scooters, Rollators, and More!
by Challenger Mobility
Challenger JPCH300 ABS-plastic holder for 12 oz. bottles with an adjustable no-slip clamp. Check tiller diameter, bottle clearance and control access.
Key Features- Twelve-ounce bottle storage: The Challenger JPCH300 holder is sized for a 12-ounce bottle and uses ABS plastic, providing a dedicated drink location on a suitably matched tiller or handle.
- Adjustable clamp attachment: A no-slip clamp tightens with a knob around the mounting bar, allowing placement where the holder and bottle leave steering and controls clear.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Joystick Weather Cover for Power Wheelchairs
by Challenger Mobility
Challenger J610 joystick cover with urethane-coated nylon, a clear viewing window and adjustable hook-and-loop strap. Check joystick clearance and hand access.
Key Features- Moisture-resistant control cover: The Challenger J610 uses urethane-coated nylon around the powerchair joystick, with a clear plastic window for viewing the controls.
- Adjustable strap opening: A hook-and-loop strap adjusts around the joystick and armrest, allowing the opening to be fitted while retaining hand access and free control movement.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Universal Scooter Cover
by Challenger Mobility
Challenger T300 ripstop-nylon scooter storage cover with zipper and hook-and-loop expansion panels. Measure for fit; not for vehicle-lift transport.
Key Features- Expandable ripstop construction: The Challenger T300 cover uses ripstop nylon with zipper and hook-and-loop expansion panels to adjust its available room around a matching scooter.
- Stationary storage use: The cover is intended for a parked scooter in storage, helping keep it clean; it is not made for transport on a vehicle-mounted lift.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility 24V 2A Lead Acid Battery Charger
by Challenger Mobility
Challenger travel-scooter SLA charger with a round three-pin plug, 110V AC input, supplied cords and automatic shutoff. Confirm battery and plug fit.
Key Features- Travel-scooter SLA charger: This Challenger off-board charger is offered for a matching travel-scooter sealed lead-acid battery system, with a round three-pin scooter connection.
- Supplied cords and shutoff: The package includes charging cords for a 110V AC supply and automatic charge shutoff; verify the battery chemistry, pack voltage and plug before replacement.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility 24V 5AH Lead Acid Battery Charger
by Challenger Mobility
Challenger EMC180 24V SLA charger with fan cooling, three-stage charging, three-pin plug and automatic shutoff. Not for 48V systems; confirm fit.
Key Features- Fan-cooled SLA charging: The Challenger EMC180 uses fan cooling and three-stage charging for a matching 24V sealed lead-acid battery system, with an off-board unit and U.S. power cord.
- Automatic completion control: Automatic shutoff is paired with a round three-pin scooter connection; this charger is not for 48V systems, and battery chemistry and plug polarity must match.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Scooter and Power Chair Cane Clips
by Challenger Mobility
Challenger J2CC metal cane-clip pair mounts beneath existing armrest screws to carry a cane beside the seat. Not compatible with Pride Go-Go scooters.
Key Features- Paired metal cane clips: The Challenger J2CC pair holds a cane beside the seat, providing an alternative to a rear-receiver walking-aid carrier on a compatible device.
- Under-armrest screw mounting: The clips fit beneath the existing armrest screws for installation; verify screw spacing and clearance, and do not select them for Pride Go-Go scooters.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it -
Challenger Mobility Kayak Cart with Large Balloon Tires
by Challenger Mobility
Challenger Mobility Kayak Cart features balloon tires for soft ground and supported loading and hull contact.
Key Features- Balloon tires for soft ground: Two 12-inch low-pressure balloon tires spread the load over a wider contact area, helping move a compatible kayak or canoe across sandy launch approaches.
- Supported loading and hull contact: A padded V-shaped frame supports the hull, while the dual kickstand steadies the cart during loading and a tie-down strap holds the vessel in place.
Free Shipping On all orders over $50 across the USAFull Warranty Full manufacturer warranty includedLifetime Support Expert help whenever you need it
