{"title":"Wheelchair Threshold Ramps","description":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/Rubber_Threshold_Ramps.jpg?v=1744230284\" alt=\"Modular rubber threshold ramp\" width=\"240\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003ch2\u003eRamps for doorway thresholds\u003c\/h2\u003e\u003cp\u003eCompare threshold ramps and entry plates from Harmar and EZ-ACCESS for small changes in floor height. Explore modular rubber, adjustable aluminum and one-piece entry designs, and check the dimensions and configuration for each listing.\u003c\/p\u003e\u003cp\u003eMeasure the rise, doorway width, door swing and available approach and landing space. Confirm the selected ramp sits securely, provides suitable slope and clearance for the user and mobility device, and meets the manufacturer’s instructions and applicable accessibility requirements.\u003c\/p\u003e","products":[{"product_id":"harmar-rubber-threshold-ramp-kit","title":"Rubber Threshold Ramp","description":"\u003ch2\u003eHarmar RAMPRKIT Modular Rubber Threshold Ramp\u003c\/h2\u003e\n\u003cp\u003eThe RAMPRKIT is a modular rubber ramp for bridging a small threshold or floor-height change. Sections join with a concealed dovetail connection and can be added or removed without tools, allowing the height to be built up in half-inch increments. A molded slip-resistant surface is listed for indoor and outdoor use. This lets the ramp be adjusted to a specific doorway rather than relying on a fixed-height wedge.\u003c\/p\u003e\n\u003ch3\u003eMeasure the Threshold and Approach\u003c\/h3\u003e\n\u003cp\u003eMeasure the vertical change across the threshold and the clear floor space on both sides. Select the height adjustment that matches the actual rise, then confirm the assembled ramp's footprint and edges do not interfere with door swing, a sliding track or the mobility device's wheels. The ramp must sit flat and stable at the doorway; a correct height alone does not guarantee a smooth approach or enough turning room.\u003c\/p\u003e\n\u003ch3\u003eBuild the Required Height\u003c\/h3\u003e\n\u003cp\u003eUse compatible sections to reach the selected half-inch increment and connect them fully at the dovetail joints. Check that each joint is seated and the assembled surface lies evenly on the floor before use. If the threshold or floor is uneven, do not force the sections to bridge unsupported gaps. Review the selected configuration and installation instructions for the exact setup.\u003c\/p\u003e\n\u003ch3\u003eSurface and Load Checks\u003c\/h3\u003e\n\u003cp\u003eThe molded texture is designed to provide traction, but wetness, dirt, loose debris and floor material can affect grip and stability. Keep the ramp and adjoining floor clean, and inspect the joints and rubber for movement or wear. A verified user\/load capacity is not stated in the available listing, so confirm the manufacturer's rating and suitability for the intended mobility device before use.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eConfirm the RAMPRKIT model, required height increment, threshold width, doorway clearance and intended indoor or outdoor placement. Check the product configuration for the number of sections supplied and follow Harmar's instructions for assembly and inspection. Do not exceed any load limit specified by the manufacturer.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587945402419,"sku":"HAR-RAMPRKIT","price":155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/Rubber_Threshold_Ramps.jpg?v=1744230284"},{"product_id":"transitions-angled-entry-ramp-p2788","title":"TRANSITIONS® Angled Entry Ramp by EZ-ACCESS®","description":"\u003ch2\u003eEZ-ACCESS TRANSITIONS Angled Entry Ramp\u003c\/h2\u003e\n\u003cp\u003eThe TRANSITIONS Angled Entry Ramp is a freestanding aluminum threshold ramp with slip-resistant extruded tread and independently adjustable legs with swivel feet. The legs can be adjusted to help the ramp sit on uneven approaches and work with doorways that swing inward or outward. Unlike a long portable ramp, this model is intended for a short threshold transition and depends on its feet sitting securely on the floor.\u003c\/p\u003e\n\u003ch3\u003eChoose Width and Set the Rise\u003c\/h3\u003e\n\u003cp\u003eThe listing offers three footprints, each 36.25 inches long: 11.877 inches wide and 5.15 lb; 23.875 inches wide and 10.4 lb; or 35.904 inches wide and 15.15 lb. The stated height range is 1 3\/8 to 5 7\/8 inches. Measure the threshold, doorway and approach area, and choose a width that gives the mobility device enough clearance. Adjust the feet independently as directed so the ramp sits stable without rocking.\u003c\/p\u003e\n\u003ch3\u003ePlan the Entry Path\u003c\/h3\u003e\n\u003cp\u003eCheck door swing, track clearance, landing space and the path over the ramp before use. The freestanding design can suit entrances where a door opens in either direction, but the selected width must not block the doorway or cross-traffic. Confirm that the mobility device can approach the ramp squarely and that both ends meet the floor and threshold without an abrupt gap.\u003c\/p\u003e\n\u003ch3\u003eLoad and Support Limits\u003c\/h3\u003e\n\u003cp\u003eA verified load capacity is not stated in the available listing. Do not infer one from the ramp's footprint or aluminum construction. Confirm the manufacturer's current load rating and support guidance for the chosen size and intended user or device before use. Inspect the adjustable feet, tread and contact surfaces regularly and keep them clear of debris.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eVerify the TAER model, selected width and weight, threshold rise, available approach space, door clearance and manufacturer load guidance. The ramp is freestanding; follow EZ-ACCESS instructions for leg adjustment, placement and inspection, and do not use it if the surface or feet cannot sit securely.\u003c\/p\u003e","brand":"EZ-Access","offers":[{"title":"Default Title","offer_id":42587946450995,"sku":"TAER","price":147.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/2jodbruw.jpg?v=1761312476"},{"product_id":"transitions®-angled-entry-plate-by-ez-access®","title":"TRANSITIONS® Angled Entry Plate by EZ-ACCESS®","description":"\u003ch2\u003eEZ-ACCESS TRANSITIONS Angled Entry Plate (TAEP)\u003c\/h2\u003e\n\u003cp\u003eThe TAEP is a one-piece, solid aluminum plate for easing a small threshold change. It has no moving parts or assembly steps; the configured length adjustment is selected when ordering. Its angled profile creates a transition at the doorway, but fit depends on the threshold rise, landing, door clearance and path of the mobility device. This plate is not the freestanding adjustable-leg TAER ramp or a long portable ramp.\u003c\/p\u003e\n\u003ch3\u003eMeasure the Opening and Select Length\u003c\/h3\u003e\n\u003cp\u003eMeasure the threshold, door opening, available approach and landing dimensions before selecting the length adjustment. Confirm that the plate sits securely against the threshold and does not interfere with the door, slider track or nearby trim. Check the mobility device's wheelbase and ground clearance against the transition, and make sure there is enough room to approach squarely.\u003c\/p\u003e\n\u003ch3\u003eMaterial and Setup\u003c\/h3\u003e\n\u003cp\u003eThe solid aluminum construction does not require powered parts or assembly. Place the plate on a stable, suitable surface and follow EZ-ACCESS's instructions for positioning and inspection. Confirm that it cannot shift during use and that both ends meet the adjoining surfaces without a gap or unsupported edge.\u003c\/p\u003e\n\u003ch3\u003eLoad and Compatibility\u003c\/h3\u003e\n\u003cp\u003eA verified weight capacity is not stated in the available listing. Do not infer one from the material or plate size. Confirm the manufacturer's current load rating and suitability for the intended wheelchair, scooter or pedestrian use before purchase. This angled plate can ease a modest threshold transition but does not replace a ramp selected for a greater rise.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eVerify the TAEP model, selected length adjustment, threshold height, doorway clearance, landing space and load guidance for the specific configuration. Compare the plate with the site measurements before ordering and inspect its contact with the floor and threshold before use.\u003c\/p\u003e","brand":"EZ-Access","offers":[{"title":"Default Title","offer_id":42587947958323,"sku":"TAEP","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/taep_1.jpg?v=1742935098"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/collections\/Rubber_Threshold_Ramps.jpg?v=1794595754","url":"https:\/\/www.topmobility.com\/collections\/wheelchair-threshold-ramps.oembed","provider":"Top Mobility","version":"1.0","type":"link"}