{"title":"Vehicle Mobility Carriers Supporting Up to 400 lb","description":"\u003cp\u003eBrowse vehicle mobility carriers and hoists supporting mobility equipment loads up to 400 lb in an eligible configuration, including models with higher maximum device-load ratings. Compare powered and manual designs, different support geometries, controls and restraint systems. A higher device rating does not prove that the selected scooter or wheelchair fits, or that a vehicle can carry the full installed load. Confirm the carrier, lift weight, device, hitch or floor mount and vehicle as one compatible unoccupied-device setup.\u003c\/p\u003e","products":[{"product_id":"al435-axis-iii-power-inside-lift-p2235","title":"Harmar - AL435 Axis III - Inside Vehicle Lift","description":"\u003ch2\u003eHarmar AL435 Axis III Powered Inside-Vehicle Hoist\u003c\/h2\u003e\n\u003cp\u003eThe AL435 is a three-axis hoist for loading a compatible manual wheelchair, power wheelchair or scooter into a vehicle. Harmar powers the lift, boom extension and rotation, so the device can be raised and moved into the cargo area without being carried through the full loading path by hand. It is rated for devices up to 400 lb. The lift is designed to work inside most SUVs, trucks and vans, and Harmar says its layout can preserve access to the backup camera. The key trade-off is vehicle-specific fit: reach, door opening and interior geometry determine whether the lift can serve the device safely.\u003c\/p\u003e\n\u003ch3\u003eCheck the Vehicle and Device Together\u003c\/h3\u003e\n\u003cp\u003eCompare the mobility device's weight, length, width and height with the vehicle opening and the AL435's available lift path. Check the cargo area's depth, ceiling clearance and the space needed for the boom to extend and rotate. A vehicle category such as SUV or van is not enough to establish fit; interior trim, seats and mounting position can alter the usable area. Harmar recommends confirming the specific vehicle and device with a dealer before ordering.\u003c\/p\u003e\n\u003ch3\u003eUnderstand the Three Powered Movements\u003c\/h3\u003e\n\u003cp\u003eThe lift's vertical movement, boom extension and rotation support a staged loading path from beside the vehicle into the cargo area. Follow the AL435 manual for the correct operating sequence, attachment and securement method. Keep the device unoccupied during lifting and transport; the hoist is for the mobility device, not a person. Do not assume the same attachment or securement accessory works for every chair or scooter. Confirm the required interface and hardware for the exact device.\u003c\/p\u003e\n\u003ch3\u003ePlan Interior Space and Access\u003c\/h3\u003e\n\u003cp\u003eBecause the AL435 stores the device inside the vehicle, it uses cargo-area space that may otherwise be needed for luggage or other equipment. Map where the chair or scooter rests after loading, how passengers enter and sit, and whether the lift or device blocks access to storage, seat adjustment or other controls. Harmar's camera-access statement is a design feature, not a substitute for checking actual visibility and clearance in the installed vehicle.\u003c\/p\u003e\n\u003ch3\u003eCapacity and Installation\u003c\/h3\u003e\n\u003cp\u003eThe 400 lb rating is the lift's maximum device capacity; verify that the device's weight is within that limit and that the vehicle and mounting structure can support the installed system. Installation is vehicle-specific. Have a Harmar dealer confirm the mounting location, floor\/structure requirements, clearances, power connection and compatible device attachment before purchase. The vehicle's own payload and loading instructions still apply.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eProvide the dealer with the vehicle year and model, the mobility device model and its dimensions, and any seat or accessory configuration that affects its footprint. Ask for confirmation of the lift path, attachment parts, safe working load and installation requirements. The AL435 is most useful when its powered lifting, extension and rotation match the actual vehicle interior and the user's loading routine.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587908866099,"sku":"HAR-AL435","price":4070.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/Harmar-AL435-P-Series-BAP-2021-7414.png?v=1755529555"},{"product_id":"axis-ii-400lb-power-inside-lift","title":"Harmar AL425 Axis II-Hoist Power And Rotate Vehicle Hoist Lift","description":"\u003ch2\u003eHarmar AL425 Axis II Powered Inside-Vehicle Hoist\u003c\/h2\u003e\n\u003cp\u003eThe AL425 Axis II is an interior hoist for loading a compatible manual wheelchair, power wheelchair or scooter into a van, SUV or truck. Harmar powers the lift and rotation so the unoccupied mobility device can be moved into the vehicle's cargo area instead of riding on an exterior hitch platform. Harmar says the inside-vehicle layout can preserve use of the backup camera. The trade-off is that the lift and device share the vehicle interior with passengers and cargo, so fit and loading geometry need to be confirmed before ordering.\u003c\/p\u003e\n\u003ch3\u003eCapacity and Device Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe standard AL425 supports devices up to 400 lb. Compare the device's actual weight, length, width and height with the vehicle opening and the hoist's reach. A device under the capacity limit can still be too large for the cargo area, interfere with trim or seats, or fail to align with the intended securement. Confirm the device model, required attachment and any accessory-specific hardware with a Harmar dealer rather than assuming the capacity rating proves fit.\u003c\/p\u003e\n\u003ch3\u003ePowered Lift and Rotation\u003c\/h3\u003e\n\u003cp\u003eThe powered lift raises the mobility device and rotates it into the cargo area. This can change the loading routine compared with a hitch platform, but it does not remove the need to guide and secure the device correctly. Keep the device unoccupied while it is being lifted and transported. Follow the AL425 manual for controls, lifting, rotation, securement and emergency procedures, and the mobility-device manufacturer's instructions for any approved attachment points.\u003c\/p\u003e\n\u003ch3\u003eVehicle-Specific Fit and Access\u003c\/h3\u003e\n\u003cp\u003eHarmar lists the AL425 for vans, SUVs and trucks, but the exact vehicle interior determines whether it will fit. Check available headroom, cargo depth, door opening, mounting location and the path through which the chair or scooter rotates. Consider how the loaded device affects passenger seating, luggage and access to the rear of the vehicle. Measure the actual vehicle and mobility device together; a model category alone is not a fit confirmation.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Transport Planning\u003c\/h3\u003e\n\u003cp\u003eConfirm the mounting structure, vehicle clearances and securement setup before installation. Check the AL425 rating along with the vehicle's payload and any relevant mounting limits, and arrange qualified installation where required. Because the device travels inside, the remaining cabin space and backup-camera view should be checked after the lift and device are in their travel positions.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eProvide a Harmar dealer with the vehicle year\/model, mobility-device model and dimensions, and the intended passenger\/cargo arrangement. Confirm the required hardware, installation and loading sequence against the current manual. The AL425 carries an unoccupied mobility device; it is not a passenger lift.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587917385779,"sku":"HAR-AL425","price":3385.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/harmar-al425-interior-powerchair-scooter-lift.jpg?v=1755530377"},{"product_id":"harmar-al001-universal-carrier","title":"Universal Outside Carrier","description":"\u003ch2\u003eHarmar AL001 Universal Manual Hitch-Mount Carrier\u003c\/h2\u003e\n\u003cp\u003eThe AL001 is a fully manual exterior carrier for a compatible mobility scooter, manual wheelchair or powerchair. Harmar lists a 500 lb device capacity and an oversized platform intended to carry standard mobility devices without modifications to the chair. Because the carrier has no powered lift, loading and stowing require physical handling; consider the user's device, the operator's strength and the loading procedure before choosing this model.\u003c\/p\u003e\n\u003ch3\u003eDevice Fit and Loading\u003c\/h3\u003e\n\u003cp\u003eMeasure the device in its transport configuration, including wheelbase, overall width and length, footrests, tiller or joystick and any accessories. Compare those measurements with the actual AL001 platform and confirm how the device will be positioned and secured. A device under the 500 lb rating is not automatically compatible if it cannot fit or be restrained correctly. Follow Harmar's instructions for loading, securing and unloading, and do not transport an occupied mobility device.\u003c\/p\u003e\n\u003ch3\u003eVehicle and Hitch Compatibility\u003c\/h3\u003e\n\u003cp\u003eHarmar lists compatibility with sedans, minivans, SUVs and vans, but the exact vehicle and hitch still require confirmation. Include both the carrier and mobility device when checking the vehicle's rear carrying capacity, payload and hitch\/tongue-weight limits. The added load and rear projection affect suspension, ground clearance, backing, parking and garage access. Verify the mounting position and clearance with a Harmar dealer before ordering.\u003c\/p\u003e\n\u003ch3\u003eManual Operation and Storage\u003c\/h3\u003e\n\u003cp\u003eThe AL001 does not require an electrical hookup or connection to the vehicle battery. Its manual operation avoids powered lift components, but the operator must perform the loading and stowing steps according to the instructions. When not in use, the carrier can be stored; check the owner's manual for the correct configuration and safe handling of its parts.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eConfirm the mobility-device model, dimensions, weight, securement points, vehicle year\/make\/model and hitch ratings. Ask the dealer to verify platform fit, mounting arrangement and rear clearance for the selected setup. The 500 lb carrier rating is the device limit, not the amount every vehicle can carry at its hitch.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587938390067,"sku":"HAR-AL001","price":1155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/86715_1_13.webp?v=1789658637"},{"product_id":"xl-heavy-duty-fusion-lift-p2631","title":"Harmar AL301XLHD Heavy Duty Fusion Scooter Or Power Wheelchair Electric Vehicle Lift","description":"\u003ch2\u003eHarmar AL301XLHD Heavy-Duty Fusion Hitch-Mount Lift\u003c\/h2\u003e\n\u003cp\u003eThe AL301XLHD is Harmar's heavy-duty Fusion outside platform lift for larger scooters and powerchairs. Its powered platform uses a 36 x 39-inch aluminum deck, adjustable front and rear cradles that extend to a maximum 53-inch span, and self-tensioning Q'Straint retractors. Harmar rates this HD model for devices up to 400 lb; the lift's installed weight is listed at 102 lb. These limits are distinct: check both the mobility device and vehicle before selecting a lift.\u003c\/p\u003e\n\u003ch3\u003eFit the Device to the Deck and Cradles\u003c\/h3\u003e\n\u003cp\u003eMeasure the device's wheelbase, overall length and width, drive-wheel location, footrests, tiller or joystick, and accessories in travel configuration. Confirm that the wheels sit securely in the adjustable cradles and the retractors reach appropriate securement points. A device can fall under 400 lb but still be incompatible if its frame geometry cannot be supported on the 36 x 39-inch deck or within the cradle span.\u003c\/p\u003e\n\u003ch3\u003ePowered Loading and Securement\u003c\/h3\u003e\n\u003cp\u003eThe AL301XLHD powers the platform's lift and fold operation. Position and secure the unoccupied device using the cradles and retractors as directed, then check that all restraint points are engaged before travel. The powered platform does not eliminate the need to align the device correctly or inspect the restraints. Follow Harmar's installation and operating instructions for the chosen wiring and hitch setup.\u003c\/p\u003e\n\u003ch3\u003eVehicle and Configuration Choices\u003c\/h3\u003e\n\u003cp\u003eThe hitch adapter, wiring method, swing-away, license-plate riser, battery pack and camera options are configuration-dependent. Confirm which are included in the selected order. Check the vehicle's hitch rating, tongue weight, payload and suspension with both the 102 lb lift and the loaded mobility device accounted for. The rear-mounted platform also affects clearance, parking, backing and access to a hatch or tailgate; a swing-away option may help with access when compatible.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eProvide the dealer with the powerchair or scooter model, loaded weight and dimensions, vehicle details, hitch class and wiring preferences. Verify the 36 x 39-inch platform, up-to-53-inch cradle reach, securement arrangement and selected accessories for the exact installation. Do not substitute the standard AL301XL's 350 lb rating for the AL301XLHD's 400 lb rating, or vice versa.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587956543539,"sku":"HAR-AL301XLHD","price":3515.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/al301xlhd-2-600x600.jpg?v=1744230282"},{"product_id":"harmar-mobility-al425hd-axis-ii-heavy-duty-mobility-hoist-lift","title":"AL425HD Axis II","description":"\u003ch2\u003eHarmar AL425HD Axis II Fully Powered Inside Lift\u003c\/h2\u003e\n\u003cp\u003eThe AL425HD is an interior hoist lift for loading a compatible mobility device into a truck cargo area. Harmar describes the Axis II as providing powered lifting and rotation, and rates the heavy-duty AL425HD for devices weighing up to 450 lb. Harmar specifies this HD model for trucks only; it is not the same vehicle-fit claim as the standard AL425. Confirm the exact truck and mobility device with a Harmar dealer before ordering.\u003c\/p\u003e\n\u003ch3\u003eChoose the docking device for the chair\u003c\/h3\u003e\n\u003cp\u003eTop Mobility lists several docking arrangements, including a T-bar for a seat-off application, a C-arm for a seat-on application, a spreader bar, and a docking device for a folding manual wheelchair. These are not interchangeable universal attachments. The correct setup depends on the chair frame, its configuration and how it can be secured. Confirm the selected docking device against the exact make, model and seating setup of the mobility equipment.\u003c\/p\u003e\n\u003ch3\u003eCheck the truck and cargo-area fit\u003c\/h3\u003e\n\u003cp\u003eAn inside lift has to fit the vehicle as well as the chair. Before choosing an AL425HD, verify truck compatibility, cargo-area dimensions and clearance for the lift's powered movement and rotation. Harmar recommends working with a trusted dealer to select a lift for a specific vehicle and mobility device. Vehicle-specific mounting and configuration should be confirmed by the installer; do not assume that an available docking option establishes fit on its own.\u003c\/p\u003e\n\u003ch3\u003eConfigure before checkout\u003c\/h3\u003e\n\u003cp\u003eThis product is highly customizable. The listed configuration may include accessories such as a battery pack, wireless remote or driver-side arm offset, depending on the order. Ask a mobility specialist to confirm which components are included, the correct docking device, vehicle compatibility, installation requirements and any needed options before placing the order. Keep the mobility device within the 450 lb rating and follow Harmar's installation, operating and maintenance instructions.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587977056307,"sku":"HAR-AL425HD","price":4690.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/Harmar-036-Harmar-AL425HD-Product-by-BAP_hpr.jpg?v=1744230277"},{"product_id":"harmar-al500hd-heavy-duty-universal-power-chair-lift","title":"Harmar AL500HD Fully Electric Universal Heavy Duty Power Wheelchair Vehicle Lift","description":"\u003cul class=\"productBullets\"\u003e\n  \u003cli\u003eUniversal design safety\u003c\/li\u003e\n  \u003cli\u003eCarries virtually all powerchairs\u003c\/li\u003e\n  \u003cli\u003e400 Lb. Lifting Capacity\u003c\/li\u003e\n  \u003cli\u003e4 Self-Tensioning, Q’Straint Retractor straps\u003c\/li\u003e\n  \u003cli\u003e26\" X 39\" Platform Size\u003c\/li\u003e\n  \u003cli\u003e75 Lb. Installed Weight\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42594568962099,"sku":"HAR-AL500HD","price":3030.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/harmar_al500-sns_down-plate_1_3_673bd5cc-d7d8-4a46-bb44-0d2e311dae08.jpg?v=1744230266"},{"product_id":"harmar-mobility-al100hd-heavy-duty-automatic-scooter-vehicle-mobility-platform-lift","title":"Scooter Vehicle Mobility Platform Lift - Heavy Duty","description":"\u003ch2\u003eHarmar Mobility AL100HD Heavy Duty Automatic Scooter Vehicle Mobility Platform Lift:\u003c\/h2\u003e\n\u003cp\u003eThis robust vehicle mobility lift is designed to accommodate scooters with a wheelbase up to 42 inches, offering a seamless and fully automatic platform carrier for effortless operation. Featuring an automatic docking arm, it securely fastens the scooter to the lift, ensuring safe and stable transport.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e400 lb. lifting capacity\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esupports a wide range of heavy-duty scooters without compromise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e26\" x 39\" aluminum deck\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith an adjustable cradle that extends to 46\" for versatile scooter sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstalled weight of 83 lbs.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eallows for easy handling and installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\" to 18\" hitch height compatibility\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eguarantees fitment with various vehicle models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic docking arm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eprovides secure attachment of the scooter to the lift platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompared to other models on the market, this Harmar Mobility AL100HD Heavy Duty Automatic Scooter Vehicle Mobility Platform Lift stands out with its superior lifting capacity and user-friendly automatic features. It surpasses industry norms by combining durable materials with an innovative design that simplifies scooter loading and unloading.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42594568994867,"sku":"HAR-AL100HD","price":2805.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/harmar_al100-sns_down-plate_1_1_693248f1-4da5-44e0-af31-c5565743de51.jpg?v=1744230264"},{"product_id":"al580-hdx","title":"AL580-HDX","description":"\u003ch2\u003eHarmar Mobility AL580-HDX High Capacity Lift for Large Mid-Wheel Power Wheelchairs\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLIFTS UP TO 450 LB The AL580-HDX is designed to lift and transport heavy mid-wheel power wheelchairs with wheel sizes from 10\" - 14\". These mobility devices are secured with a combination of 4-Q'straint retractors and a hold-down arm. The Stars-N-Stripes platform guards against road debris and in some cases the optional swing-away maintains access to a vehicle's cargo area. The AL580-HDX is compatible with a variety of SUV's, trucks, and crossovers. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStars and Stripes Platform engineered to prevent road debris from damaging the underside of your power wheelchair\u003c\/li\u003e\n\u003cli\u003e4 Q-Straint retractors secure your mobility device in place\u003c\/li\u003e\n\u003cli\u003eAdjustable wheel cradles ensure securement and prevent damage during transport\u003c\/li\u003e\n\u003cli\u003e450 lb. weight capacity\u003c\/li\u003e\n\u003cli\u003e27\"W x 23\"D x 33\" footprint\u003c\/li\u003e\n\u003cli\u003einstalled weight is 92 lbs.\u003c\/li\u003e\n\u003cli\u003eAccomidates mid-wheel drive power wheelchairs with 10\" to 14\" drive wheels\u003c\/li\u003e\n\u003cli\u003ePadded hold-down arm, wheel cradle, Hitch Post, Hitch Adapter included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":44037999231027,"sku":"AL580-HDX","price":4245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/HDX.png?v=1770401391"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/collections\/harmar_al500-sns_down-plate_1_3_673bd5cc-d7d8-4a46-bb44-0d2e311dae08.jpg?v=1795030705","url":"https:\/\/www.topmobility.com\/collections\/vehicle-mobility-carriers-rated-400-lb-and-up.oembed","provider":"Top Mobility","version":"1.0","type":"link"}