{"title":"Vehicle Mobility Scooter Lifts","description":"\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003evehicle mobility scooter lifts\u003c\/strong\u003e collection was built with your everyday concerns in mind—whether that's safely traveling to medical appointments, running errands, or simply getting out with friends. Every lift here is handpicked to suit a variety of vehicles and scooter models, solving the widespread need for a reliable way to load, secure, and transport your mobility scooter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIs your car hitch ready?  Check Here:  \u003ca href=\"https:\/\/www.uhaul.com\/Trailer-Hitches\/\" title=\"UHaul Hitch Locatory\" rel=\"noopener\" target=\"_blank\"\u003ewww.uhaul.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWant to check if your unit is compatable with our Harmar lifts and your vehicle?  Click Here: \u003ca href=\"https:\/\/calculator.harmar.com\/\" title=\"Harmar Compatability Calculator\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/calculator.harmar.com\/\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"wheelchair-carrier-model-117-mini-automatic-scooter-vehicle-mobility-platform-lift","title":"Scooter Vehicle Mobility Platform Lift - Mini","description":"\u003ch2\u003eWheelChair Carrier Mini Electric Lift, Model 117\u003c\/h2\u003e\n\u003cp\u003eThe Model 117 is a powered hitch-mounted platform for carrying a compatible mobility device outside a vehicle. Its 22 x 37 inch usable platform and 150 lb device capacity make it a compact-format lift, while the 88 lb lift weight creates a second load that must be included in vehicle planning. The platform raises and folds into a stowaway position when empty. This arrangement can reduce the effort of manually lifting a device to vehicle height, but it still requires correct device placement, securement and a vehicle-and-hitch combination rated for the complete load.\u003c\/p\u003e\n\u003ch3\u003eCheck Platform Fit Before Capacity\u003c\/h3\u003e\n\u003cp\u003eA device can weigh less than 150 lb and still be too long, wide or shaped incorrectly for the 22 x 37 inch usable platform. Measure the scooter or powerchair in the exact configuration that will travel, including protruding controls, footrests or other parts that affect its footprint. Confirm that the wheels or base sit within the platform and that the included retractable ratchets can secure the device as instructed. Capacity alone does not establish fit or securement compatibility.\u003c\/p\u003e\n\u003ch3\u003eLoading, Folding and Rear Access\u003c\/h3\u003e\n\u003cp\u003eUse the switch-box controls to operate the lift and follow the owner's manual for loading, raising and lowering. The manufacturer describes a stowaway position for the unloaded platform; do not assume it folds in the same way with a device aboard. Before installation, consider how the carrier will sit relative to the bumper, tailgate, exhaust, lights and license plate. A loaded platform can change access to the rear of the vehicle or obscure vehicle equipment. Check the full movement path and the lift's folded position against the vehicle you plan to use.\u003c\/p\u003e\n\u003cp\u003eWheelChair Carrier lists up to 24 inches of possible ground clearance. That is not a guaranteed clearance for every vehicle: hitch height, suspension, cargo load and installation affect the platform's position. Check the actual clearance on the installed vehicle, especially over driveways and other transitions, rather than treating the maximum figure as a route guarantee.\u003c\/p\u003e\n\u003ch3\u003ePower and Vehicle Connection\u003c\/h3\u003e\n\u003cp\u003eThe Model 117 includes a 21 ft wire harness, a 30 amp resettable circuit breaker and switch-box controls. Confirm the installation route and connection requirements against the supplied manual and vehicle, and make sure the harness can reach without interfering with moving parts or exposed heat. The lift is available for a 1 1\/4 inch or 2 inch square hitch receiver; select the size that matches the receiver actually installed on the vehicle, not an adapter assumed to be present.\u003c\/p\u003e\n\u003ch3\u003eAccount for the Entire Vehicle Load\u003c\/h3\u003e\n\u003cp\u003eInclude the 88 lb lift, the mobility device and any carried equipment when checking the receiver, hitch, vehicle payload and tongue-weight limits. The manufacturer specifically warns not to exceed the hitch manufacturer's recommended towing capacity. A hitch opening that accepts the receiver does not prove that the vehicle can safely support the lift and loaded platform. Review the vehicle and hitch ratings together and arrange professional installation if the wiring, receiver or clearances are uncertain.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eConfirm the device footprint, loaded weight, ratchet securement, receiver size, wiring route and installed clearance. Compare those details with the Model 117 installation and owner's manuals and the vehicle manufacturer's limits. The lift is best evaluated as one part of a complete transport system, not as an independent 150 lb rating.\u003c\/p\u003e","brand":"Wheelchair Carrier","offers":[{"title":"Default Title","offer_id":42587904344115,"sku":"WC-117","price":1549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/117-scooter-lift_c5a5_1.jpg?v=1769611824"},{"product_id":"wheelchair-carrier-model-210-lift-n-go-vehicle-mobility-platform-lift","title":"Lift N' Go","description":"\u003ch2\u003eWheelChair Carrier Lift 'n' Go Electric Lift, Model 210\u003c\/h2\u003e\n\u003cp\u003eThe Model 210 is a powered hitch-mounted platform for carrying a compatible mobility device outside a vehicle. It offers a larger 28 x 48 inch usable platform than the Model 117 and is rated for a 350 lb device load. The lift itself weighs 103 lb, which is a separate part of the vehicle's load. The platform folds into a stowaway position when empty, but the lift remains mounted to the hitch and adds weight behind the vehicle. Plan around the device, lift, receiver and vehicle as one system.\u003c\/p\u003e\n\u003ch3\u003eMatch the Device to the Platform\u003c\/h3\u003e\n\u003cp\u003eMeasure the mobility device in the exact travel configuration, including footrests, tiller or control assemblies and other parts that extend its footprint. Compare those measurements with the 28 x 48 inch usable area. A device below the 350 lb capacity can still be too long, wide or shaped differently from the platform, or may not align with the supplied securement. The Model 210 includes two retractable ratchets for securing the device; check the owner's manual and confirm the device can be secured as directed before ordering.\u003c\/p\u003e\n\u003ch3\u003eOperating and Stowing the Lift\u003c\/h3\u003e\n\u003cp\u003eA switchbox operates the powered platform. Follow the owner's manual for raising, lowering and securing the lift, and keep people clear of the moving platform during operation. The manufacturer describes a stowaway position when the platform is empty. Confirm that the raised platform clears the vehicle and that folding it does not block access to lights, the license plate or other required equipment. Also consider how the lift changes access to a tailgate or rear door when loaded.\u003c\/p\u003e\n\u003cp\u003eWheelChair Carrier lists up to 24 inches of possible ground clearance. Actual clearance depends on the vehicle's ride height, receiver position, suspension and installation. Check the installed lift over the driveways and transitions you use; the maximum listed figure is not a guarantee for every vehicle or load.\u003c\/p\u003e\n\u003ch3\u003eReceiver, Wiring and Vehicle Limits\u003c\/h3\u003e\n\u003cp\u003eThe Model 210 is available for 1 1\/4 inch or 2 inch square hitch receivers. Select the size that matches the receiver actually installed on the vehicle, and confirm compatibility with any required mounting hardware. The lift includes a 21 ft wire harness and a 30 amp resettable circuit breaker. Installation must provide a suitable route for the harness and a secure connection; review the manufacturer's installation manual or arrange qualified installation if the electrical or hitch requirements are unclear.\u003c\/p\u003e\n\u003cp\u003eWhen checking capacity, count the 103 lb lift, the mobility device and any accessories or cargo. Confirm the vehicle's payload and the receiver and hitch ratings, including tongue-weight limits. The manufacturer warns not to exceed the hitch manufacturer's recommended towing capacity. A receiver that physically fits the lift does not prove the vehicle can safely support the combined load.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eVerify the device footprint and securement, receiver size, lift weight, vehicle ratings, wiring route and loaded-platform clearance. Check that the complete lift path clears the bumper, tailgate, exhaust, lights and license plate. Review the Model 210 owner's and installation manuals before use; the platform's capacity is only one part of a safe vehicle-lift installation.\u003c\/p\u003e","brand":"Wheelchair Carrier","offers":[{"title":"Default Title","offer_id":42587904966707,"sku":"WC-210","price":1995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/top-mobility-210-scooter-lift.jpg?v=1755528610"},{"product_id":"side-door-hybrid-platform-lift-p179","title":"Harmar - AL690 Side Door Lift - Hybrid Vehicle Lift","description":"\u003ch2\u003eHarmar AL690 Side Door Hybrid Platform Lift\u003c\/h2\u003e\n\u003cp\u003eThe AL690 is a vehicle-integrated lift designed to load a compatible power wheelchair or scooter through a van's side door and carry it inside near the second-row seating. Harmar says this arrangement can leave third-row seating and rear cargo space available and preserve access to the backup camera. The mobility device rides unoccupied and is secured with manual straps. This is a different setup from an exterior hitch carrier: vehicle interior space and installation compatibility determine whether it can work.\u003c\/p\u003e\n\u003ch3\u003eCapacity and Device Fit\u003c\/h3\u003e\n\u003cp\u003eThe AL690 is rated for mobility devices up to 275 lb. Compare the device's actual weight, width, length, wheelbase and loading points with the lift and van interior; capacity alone does not establish that the device will fit the opening or be secured correctly. The vehicle seat layout, door opening, interior trim and position of the second row all affect the available path. Confirm clearance through the door and the final parked position before choosing the lift.\u003c\/p\u003e\n\u003ch3\u003eLoading and Securement\u003c\/h3\u003e\n\u003cp\u003eSide loading brings the device into the vehicle's seating area rather than placing it on an outside platform. Once loaded, the device must be secured with the supplied manual straps according to the AL690 instructions. Follow the lift and mobility-device manuals for the loading sequence, tie-down points and travel checks. The lift transports the unoccupied mobility device; it is not designed to carry a person while raising or during vehicle travel.\u003c\/p\u003e\n\u003ch3\u003eVehicle-Specific Installation\u003c\/h3\u003e\n\u003cp\u003eHarmar describes the AL690 as compatible with most minivans and vans, not every vehicle. Installation depends on the specific floor structure, seat attachment points, door geometry and clearance beneath the vehicle. Harmar notes that some installations may use existing seat attachment points, while others may require drilling into the floor. Underbody components and the planned mounting position must be checked by a qualified installer before work begins.\u003c\/p\u003e\n\u003cp\u003eConsider how the lift affects passenger seating, rear cargo, seat movement, door operation, lights and the backup camera. The product page does not provide a universal vehicle-fit list that replaces an installation assessment. Ask a Harmar dealer to confirm the exact van year\/model, mobility device dimensions, mounting method and whether modifications are required before ordering.\u003c\/p\u003e\n\u003ch3\u003eBefore Purchase\u003c\/h3\u003e\n\u003cp\u003eConfirm the 275 lb device limit, loading clearance, strap arrangement, interior floor support and remaining passenger\/cargo space as one setup. Review the installation and owner's manuals with the installer. A suitable van model alone is not enough; the lift, device and specific interior configuration must all work together.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587908571187,"sku":"HA-AL690","price":4135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/al690_harmar-platform.jpg?v=1744230316"},{"product_id":"al435-axis-iii-power-inside-lift-p2235","title":"Harmar - AL435 Axis III - Inside Vehicle Lift","description":"\u003ch2\u003eHarmar AL435 Axis III Powered Inside-Vehicle Hoist\u003c\/h2\u003e\n\u003cp\u003eThe AL435 is a three-axis hoist for loading a compatible manual wheelchair, power wheelchair or scooter into a vehicle. Harmar powers the lift, boom extension and rotation, so the device can be raised and moved into the cargo area without being carried through the full loading path by hand. It is rated for devices up to 400 lb. The lift is designed to work inside most SUVs, trucks and vans, and Harmar says its layout can preserve access to the backup camera. The key trade-off is vehicle-specific fit: reach, door opening and interior geometry determine whether the lift can serve the device safely.\u003c\/p\u003e\n\u003ch3\u003eCheck the Vehicle and Device Together\u003c\/h3\u003e\n\u003cp\u003eCompare the mobility device's weight, length, width and height with the vehicle opening and the AL435's available lift path. Check the cargo area's depth, ceiling clearance and the space needed for the boom to extend and rotate. A vehicle category such as SUV or van is not enough to establish fit; interior trim, seats and mounting position can alter the usable area. Harmar recommends confirming the specific vehicle and device with a dealer before ordering.\u003c\/p\u003e\n\u003ch3\u003eUnderstand the Three Powered Movements\u003c\/h3\u003e\n\u003cp\u003eThe lift's vertical movement, boom extension and rotation support a staged loading path from beside the vehicle into the cargo area. Follow the AL435 manual for the correct operating sequence, attachment and securement method. Keep the device unoccupied during lifting and transport; the hoist is for the mobility device, not a person. Do not assume the same attachment or securement accessory works for every chair or scooter. Confirm the required interface and hardware for the exact device.\u003c\/p\u003e\n\u003ch3\u003ePlan Interior Space and Access\u003c\/h3\u003e\n\u003cp\u003eBecause the AL435 stores the device inside the vehicle, it uses cargo-area space that may otherwise be needed for luggage or other equipment. Map where the chair or scooter rests after loading, how passengers enter and sit, and whether the lift or device blocks access to storage, seat adjustment or other controls. Harmar's camera-access statement is a design feature, not a substitute for checking actual visibility and clearance in the installed vehicle.\u003c\/p\u003e\n\u003ch3\u003eCapacity and Installation\u003c\/h3\u003e\n\u003cp\u003eThe 400 lb rating is the lift's maximum device capacity; verify that the device's weight is within that limit and that the vehicle and mounting structure can support the installed system. Installation is vehicle-specific. Have a Harmar dealer confirm the mounting location, floor\/structure requirements, clearances, power connection and compatible device attachment before purchase. The vehicle's own payload and loading instructions still apply.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eProvide the dealer with the vehicle year and model, the mobility device model and its dimensions, and any seat or accessory configuration that affects its footprint. Ask for confirmation of the lift path, attachment parts, safe working load and installation requirements. The AL435 is most useful when its powered lifting, extension and rotation match the actual vehicle interior and the user's loading routine.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587908866099,"sku":"HAR-AL435","price":4070.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/Harmar-AL435-P-Series-BAP-2021-7414.png?v=1755529555"},{"product_id":"al600-universal-hpl-p175","title":"Harmar AL600 Classic Hybrid Fully Electric Auto Platform Power Wheelchair or Scooter Lift","description":"\u003ch2\u003eHarmar AL600 Classic Interior Hybrid Platform Lift\u003c\/h2\u003e\n\u003cp\u003eThe AL600 Classic is a hybrid platform lift that carries a compatible power wheelchair or scooter inside a vehicle's cargo area. Harmar lists a 350 lb device capacity and compatibility with most minivans, SUVs and vans. Four cam-buckle straps secure the mobility device, and the interior layout can preserve use of the rearview camera. Unlike an exterior hitch carrier, the AL600 uses cargo space inside the vehicle, so the key purchase question is whether the device, platform and installation fit the exact interior without blocking seats or access.\u003c\/p\u003e\n\u003ch3\u003eMatch Platform, Device and Cargo Area\u003c\/h3\u003e\n\u003cp\u003eConfirm the mobility device's weight and dimensions in the travel configuration, then compare them with the platform and available vehicle space. A device under 350 lb can still be too wide or long to fit, or may not align with the securement points. Measure the cargo opening, floor area, ceiling clearance and path from the lift position to the intended storage position. Harmar's reference to most vans and SUVs is not a universal fit guarantee; seat layout, trim and mounting structure vary by vehicle.\u003c\/p\u003e\n\u003ch3\u003eSecure the Device for Travel\u003c\/h3\u003e\n\u003cp\u003eThe AL600 uses four cam-buckle straps to hold the unoccupied powerchair or scooter during transport. Follow the AL600 manual for strap placement, tension and inspection, and confirm the device frame can be secured as directed. The lift is not for carrying a person while raising, lowering or traveling. Do not substitute improvised straps or assume that an accessory from another carrier will work with this platform.\u003c\/p\u003e\n\u003ch3\u003eConsider Passenger and Rear-Camera Access\u003c\/h3\u003e\n\u003cp\u003eStoring the mobility device inside may protect it from some outside exposure and keep it within the vehicle, but it occupies cargo space. Check how the loaded lift affects passenger seating, luggage, seat movement, the tailgate and access to other equipment. Harmar notes that the design can preserve rearview-camera use; verify that the camera view remains clear in the actual vehicle after installation and loading.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Vehicle Ratings\u003c\/h3\u003e\n\u003cp\u003eHave the exact vehicle and mobility device reviewed by a Harmar dealer before ordering. Confirm the mounting structure and location, platform clearance, installation requirements and any accessories needed for the selected configuration. Account for the lift and device together when checking the vehicle payload and loading limits. A 350 lb platform rating does not establish that the vehicle floor, suspension or payload can carry that combined load.\u003c\/p\u003e\n\u003ch3\u003eBefore Purchase\u003c\/h3\u003e\n\u003cp\u003eProvide the vehicle year\/model and device dimensions and weight for a fit assessment. Review the installation and owner's manuals, including securement and travel checks. The AL600 is a practical option when inside-cargo transport is preferred and the chosen vehicle has enough room for both the installed lift and its load.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587916632115,"sku":"HAR-AL600","price":3795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/Harmar-010_Harmar_LazySusan_Lifts_by_meetbigwave.com.png?v=1755530318"},{"product_id":"axis-ii-400lb-power-inside-lift","title":"Harmar AL425 Axis II-Hoist Power And Rotate Vehicle Hoist Lift","description":"\u003ch2\u003eHarmar AL425 Axis II Powered Inside-Vehicle Hoist\u003c\/h2\u003e\n\u003cp\u003eThe AL425 Axis II is an interior hoist for loading a compatible manual wheelchair, power wheelchair or scooter into a van, SUV or truck. Harmar powers the lift and rotation so the unoccupied mobility device can be moved into the vehicle's cargo area instead of riding on an exterior hitch platform. Harmar says the inside-vehicle layout can preserve use of the backup camera. The trade-off is that the lift and device share the vehicle interior with passengers and cargo, so fit and loading geometry need to be confirmed before ordering.\u003c\/p\u003e\n\u003ch3\u003eCapacity and Device Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe standard AL425 supports devices up to 400 lb. Compare the device's actual weight, length, width and height with the vehicle opening and the hoist's reach. A device under the capacity limit can still be too large for the cargo area, interfere with trim or seats, or fail to align with the intended securement. Confirm the device model, required attachment and any accessory-specific hardware with a Harmar dealer rather than assuming the capacity rating proves fit.\u003c\/p\u003e\n\u003ch3\u003ePowered Lift and Rotation\u003c\/h3\u003e\n\u003cp\u003eThe powered lift raises the mobility device and rotates it into the cargo area. This can change the loading routine compared with a hitch platform, but it does not remove the need to guide and secure the device correctly. Keep the device unoccupied while it is being lifted and transported. Follow the AL425 manual for controls, lifting, rotation, securement and emergency procedures, and the mobility-device manufacturer's instructions for any approved attachment points.\u003c\/p\u003e\n\u003ch3\u003eVehicle-Specific Fit and Access\u003c\/h3\u003e\n\u003cp\u003eHarmar lists the AL425 for vans, SUVs and trucks, but the exact vehicle interior determines whether it will fit. Check available headroom, cargo depth, door opening, mounting location and the path through which the chair or scooter rotates. Consider how the loaded device affects passenger seating, luggage and access to the rear of the vehicle. Measure the actual vehicle and mobility device together; a model category alone is not a fit confirmation.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Transport Planning\u003c\/h3\u003e\n\u003cp\u003eConfirm the mounting structure, vehicle clearances and securement setup before installation. Check the AL425 rating along with the vehicle's payload and any relevant mounting limits, and arrange qualified installation where required. Because the device travels inside, the remaining cabin space and backup-camera view should be checked after the lift and device are in their travel positions.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eProvide a Harmar dealer with the vehicle year\/model, mobility-device model and dimensions, and the intended passenger\/cargo arrangement. Confirm the required hardware, installation and loading sequence against the current manual. The AL425 carries an unoccupied mobility device; it is not a passenger lift.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587917385779,"sku":"HAR-AL425","price":3385.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/harmar-al425-interior-powerchair-scooter-lift.jpg?v=1755530377"},{"product_id":"wheelchair-carrier-xl4-extra-large-scooter-vehicle-mobility-cradle-lift","title":"XL4 Extra Large Cradle Lift","description":"\u003ch2\u003eWheelChair Carrier XL4 Extra-Large Electric Hitch Lift\u003c\/h2\u003e\n\u003cp\u003eThe XL4 is a powered exterior lift for transporting a compatible mobility device on a 48 x 34 inch usable platform. WheelChair Carrier lists a 350 lb device capacity and a lift weight of 106 lb. The platform automatically folds into a stowaway position when empty, while retractable ratchets are listed for securing the device. This combination is intended for larger devices that need a broad platform, but the lift's size and weight make vehicle and hitch planning essential.\u003c\/p\u003e\n\u003ch3\u003eVerify Device Fit and Securement\u003c\/h3\u003e\n\u003cp\u003eMeasure the mobility device in its travel configuration, including wheelbase, overall width and length, footrests, tiller or controls and any accessories that project beyond the frame. Compare those measurements with the 48 x 34 inch usable platform; being under the 350 lb capacity does not guarantee that the device will fit or can be positioned securely. The manufacturer lists retractable ratchets, but the store's included-items information gives a different strap count. Confirm the supplied securement hardware with the seller before ordering and follow the XL4 manual for placement and tension.\u003c\/p\u003e\n\u003ch3\u003eFolding, Clearance and Route Planning\u003c\/h3\u003e\n\u003cp\u003eThe platform folds into a stowaway position when unloaded. WheelChair Carrier lists up to 24 inches of possible ground clearance, but installed clearance depends on the vehicle, receiver height, suspension and load. Check the lift through the entire operating path and over the driveway transitions the vehicle will encounter. The carrier's 106 lb weight and the loaded device extend behind the vehicle, affecting parking, backing, garage access and the vehicle's rear overhang.\u003c\/p\u003e\n\u003ch3\u003eReceiver and Vehicle Load Limits\u003c\/h3\u003e\n\u003cp\u003eThe XL4 accommodates 1 1\/4 inch or 2 inch square hitch receivers and includes a 21 ft wire harness with a 30 amp resettable circuit breaker. Confirm that the receiver size matches the vehicle's actual hitch and that the mounting arrangement and wiring are appropriate for the installation. Include the lift, device, passengers and other cargo in vehicle payload calculations, and check receiver and tongue-weight ratings. The manufacturer warns not to exceed the hitch manufacturer's recommended towing capacity; the lift's 350 lb capacity does not replace those vehicle limits.\u003c\/p\u003e\n\u003ch3\u003eBefore Purchase and Use\u003c\/h3\u003e\n\u003cp\u003eConfirm platform fit, securement details, receiver size, wiring, installed clearance and the combined load with WheelChair Carrier or a qualified installer. Use the lift only for an unoccupied mobility device, and follow the owner's and installation manuals for loading, securement and travel. The XL4 is best assessed as a complete lift\/vehicle\/device combination, not by platform size alone.\u003c\/p\u003e","brand":"Wheelchair Carrier","offers":[{"title":"Default Title","offer_id":42587919941683,"sku":"WC-XL4","price":2395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/xl4-top.jpg?v=1755531331"},{"product_id":"al160-profile-scooter-lift-p2606","title":"Harmar AL160 Profile Fully Powered Mobility Scooter Vehicle Lift","description":"\u003ch2\u003eHarmar AL160 Profile Powered Scooter Hitch Lift\u003c\/h2\u003e\n\u003cp\u003eThe AL160 is an exterior hitch-mounted lift for a compatible power scooter. Harmar specifies a scooter wheelbase from 30 to 42 inches and a maximum device weight of 350 lb. The powered system raises and folds the carrier, providing a loading routine without requiring modifications to the scooter itself. Its value depends on matching that exact wheelbase range and the installed vehicle; the 350 lb capacity alone does not confirm platform fit or vehicle suitability.\u003c\/p\u003e\n\u003ch3\u003eCheck the Scooter's Wheelbase and Weight\u003c\/h3\u003e\n\u003cp\u003eMeasure the scooter from axle to axle in the configuration that will be carried, and confirm that the device is within both the 30–42 inch wheelbase range and the 350 lb limit. Also check the scooter's full width and length, where it contacts the carrier and how it will be secured. A scooter can meet the weight rating and still fall outside the lift's wheelbase or fit requirements. Confirm the exact model and any seat or accessory setup with Harmar or the dealer before ordering.\u003c\/p\u003e\n\u003ch3\u003ePowered Lifting and Folding\u003c\/h3\u003e\n\u003cp\u003eThe AL160 lifts the scooter on an exterior platform and folds when not in use. Follow the manual's sequence for loading, securing, raising and folding, and transport the scooter unoccupied. Check that the scooter is positioned and held as the manufacturer instructs before moving the vehicle. If a swing-away option is being considered, verify that it is compatible with the selected vehicle and installation rather than assuming it will work with every receiver setup.\u003c\/p\u003e\n\u003ch3\u003eVehicle and Hitch Compatibility\u003c\/h3\u003e\n\u003cp\u003eHarmar lists minivans, SUVs, trucks and vans as vehicle categories, but installation and load ratings are vehicle-specific. Confirm receiver size, hitch rating, tongue-weight limit, vehicle payload and ground clearance with Harmar's vehicle calculator or a dealer. Include the lift, scooter, passengers and cargo in the load calculation. The added rear length can affect backing, parking, driveway transitions and garage entry, even when the lift is folded.\u003c\/p\u003e\n\u003ch3\u003eBefore Purchase and Use\u003c\/h3\u003e\n\u003cp\u003eProvide the scooter's model, wheelbase, weight and dimensions along with the vehicle year\/model and hitch details. Ask the dealer to verify lift fit, securement, electrical installation and any swing-away selection. Review the AL160 owner's and installation manuals before use. The lift carries an unoccupied scooter; it is not designed to lift or transport a person.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587922694195,"sku":"HAR-AL160","price":2430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/AL160-Profile-scooter-lift.jpg?v=1760029862"},{"product_id":"harmar-mobility-al015-micro-automatic-scooter-vehicle-mobility-cradle-lift","title":"Scooter Vehicle Mobility Cradle Lift - Micro","description":"\u003ch2\u003eHarmar AL015 Profile Micro Scooter Hitch-Mount Lift\u003c\/h2\u003e\n\u003cp\u003eThe AL015 is a powered hitch-mounted lift for compact scooters. Harmar specifies scooters up to 150 lb with wheelbases up to 36 inches and describes the lift as compatible with most sedans. The lift raises and lowers the scooter; for this listing, the empty platform folds manually. That distinction matters when comparing it with fully powered lift-and-fold models or planning who will handle the platform after unloading.\u003c\/p\u003e\n\u003ch3\u003eMeasure the Scooter and Select the Cradle\u003c\/h3\u003e\n\u003cp\u003eCheck the scooter's total travel weight, wheelbase, tire position and overall shape against the AL015's limits. Harmar describes a setup for three-wheel scooters and an additional wheel cradle that can accommodate many four-wheel scooters. The correct cradle arrangement depends on the scooter and selected configuration, so verify the exact lift setup before ordering. A scooter can meet the stated weight and wheelbase limits yet still need a different cradle or mounting arrangement.\u003c\/p\u003e\n\u003ch3\u003eLoading and Daily Handling\u003c\/h3\u003e\n\u003cp\u003eThe powered lift takes the scooter's weight during raising and lowering, reducing the need to lift the mobility device by hand. The scooter must be unoccupied during operation and vehicle travel. Position and secure the scooter as directed in the lift manual, and check that controls, tiller and accessories do not obstruct the cradle or vehicle. Since the empty platform folds manually, include that step in the user's or caregiver's loading routine.\u003c\/p\u003e\n\u003ch3\u003eVehicle and Hitch Compatibility\u003c\/h3\u003e\n\u003cp\u003eHarmar lists compatibility with most sedans, but the exact vehicle, receiver and mounting type still need to be confirmed. The lift and loaded scooter add weight and length behind the vehicle, affecting receiver loading, rear clearance, parking and garage access. Ask a Harmar dealer to verify the vehicle, hitch ratings and any required installation hardware. A swing-away option is available for some applications; confirm vehicle compatibility rather than assuming it is part of the standard lift.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eProvide the dealer with the scooter model, travel weight, wheelbase, wheel count and vehicle details. Confirm cradle selection, lift operation, receiver fit and the manual-folding step for the empty platform. Use the owner's and installation manuals for securement and travel checks. The 150 lb device limit and 36 inch wheelbase limit are separate checks and do not replace vehicle or hitch ratings.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587924529203,"sku":"HAR-AL015","price":2090.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/Harmar-AL015-P-Series-BAP-2021-6980.png?v=1747768511"},{"product_id":"harmar-mobility-al215-axis-i-automatic-scooter-or-power-wheelchair-vehicle-mobility-low-profile-hoist-lift","title":"Scooter \/ Power Wheelchair Vehicle Mobility Hoist Lift - Low Profile","description":"\u003ch2\u003eHarmar AL215 Axis I Low-Profile Inside-Vehicle Hoist\u003c\/h2\u003e\n\u003cp\u003eThe AL215 is an interior hoist for transporting a compatible scooter, manual wheelchair or power wheelchair inside a vehicle. It raises the device with a weather-resistant hand control, then rotates manually into the cargo area. This powered-lift\/manual-rotation sequence can reduce the effort of lifting a mobility device, but the user or caregiver still has to position it, guide the rotation and secure it for travel. Unlike an exterior platform carrier, the AL215 stores the device inside the vehicle and Harmar says it preserves use of the backup camera.\u003c\/p\u003e\n\u003ch3\u003eCapacity and Docking Device\u003c\/h3\u003e\n\u003cp\u003eHarmar rates the AL215 for devices up to 250 lb. The device must also be compatible with a selected docking attachment: current choices include a T-bar for seat-off use, a spreader bar, an adjustable C-arm for seat-on use, and a docking device for an accordion-folding manual wheelchair. These are not interchangeable accessories; the correct option depends on the mobility device, its seat and frame, and how it will be loaded. Confirm the lift's attachment point and exact docking hardware with a Harmar dealer before ordering.\u003c\/p\u003e\n\u003ch3\u003eVehicle Space and Rotation\u003c\/h3\u003e\n\u003cp\u003eMeasure the cargo opening, floor height, available depth and width, and the path the device must follow as it rotates into the vehicle. The AL215 is designed for a variety of minivans, SUVs, vans and trucks, but compatibility is vehicle-specific. Seat removal, docking-bar placement, false-floor or flat-floor adapters and the location of other cargo can affect installation. The arm height is adjustable, and base adapters may be needed for some floor arrangements; verify them for the actual vehicle rather than assuming the base unit fits every cargo area.\u003c\/p\u003e\n\u003ch3\u003eEveryday Loading and Safety\u003c\/h3\u003e\n\u003cp\u003ePark on stable, level ground for loading, keep people clear of the device's movement path and use the hand control according to Harmar's instructions. The mobility device must be unoccupied while it is lifted and rotated. After loading, check that the device and lift are secured for travel. The manual rotation remains a physical task even though the lifting is powered, so consider the operator's strength, balance and ability to guide the device safely.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eProvide the dealer with the vehicle year, make and model, cargo measurements, mobility-device model and weight, and whether the seat stays on. Confirm the docking device, floor adapter, mounting location and operating clearance. The 250 lb lifting capacity does not confirm the correct dock or vehicle fit. Review the installation and owner's manuals for the selected configuration.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587927740467,"sku":"HAR-AL215","price":1790.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/harmar_AL215.jpg?v=1744230297"},{"product_id":"wheelchair-carrier-model-208-patriotic-vehicle-mobility-platform-lift","title":"Patriotic Platform Lift","description":"\u003ch2\u003eWheelChair Carrier US208 Patriotic Electric Platform Lift\u003c\/h2\u003e\n\u003cp\u003eThe US208 is an exterior hitch-mounted lift with a 28 x 48 inch usable platform and a 350 lb mobility-device capacity. A switchbox raises and lowers the platform, which folds into a stowed position when empty. The open platform can be loaded from either side, offering more flexibility in parking locations than a lift that accepts the device from only one approach. Two retractable ratchets are listed to secure the device for travel.\u003c\/p\u003e\n\u003ch3\u003eCheck the Device on the Platform\u003c\/h3\u003e\n\u003cp\u003eMeasure the scooter or wheelchair in its transport-ready configuration, including wheelbase, width, length, footrests, tiller or joystick, and accessories that extend beyond the frame. Compare the measurements with the 28 x 48 inch usable area and plan where the wheels and securement points will sit. A device under the 350 lb rating is not necessarily compatible if it does not fit or cannot be secured. Follow the lift manual for positioning and ratchet placement; do not transport an occupied mobility device.\u003c\/p\u003e\n\u003ch3\u003eMounting and Vehicle Load\u003c\/h3\u003e\n\u003cp\u003eThe listing specifies 1 1\/4 inch or 2 inch square hitch receivers. Confirm receiver size, mounting type and vehicle compatibility before ordering. Include the lift's own weight, the loaded mobility device, passengers and cargo when checking vehicle payload and receiver\/tongue-weight limits. The 350 lb platform rating applies to the carried device, not the vehicle's remaining capacity, and does not override the vehicle or hitch manufacturer's limits.\u003c\/p\u003e\n\u003ch3\u003eStowage, Clearance and Accessories\u003c\/h3\u003e\n\u003cp\u003eWhen empty, the powered platform folds toward the vehicle. Check the installed lift's ground clearance and rear projection with the actual vehicle and hitch, particularly at driveway transitions and when entering a garage or parking space. A swing-away arm may be available as an accessory for some setups; confirm its compatibility and whether it is included in the selected order. A license-plate riser and replacement ratchets are also listed separately.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering and Use\u003c\/h3\u003e\n\u003cp\u003eConfirm platform fit, receiver and mounting type, securement layout, wiring and vehicle ratings with the seller or a qualified installer. Account for the additional rear length when backing and parking, and follow the owner's and installation manuals for operation and travel checks. The US208 is a vehicle-mounted carrier for an unoccupied mobility device; never exceed the hitch manufacturer's recommended towing capacity.\u003c\/p\u003e","brand":"Wheelchair Carrier","offers":[{"title":"Default Title","offer_id":42587929182259,"sku":"US208","price":1995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/us208_lift_patriotic.jpg?v=1724445354"},{"product_id":"harmar-mobility-al010-micro-automatic-scooter-vehicle-mobility-platform-lift","title":"Scooter Vehicle Mobility Platform Lift - Micro","description":"\u003ch2\u003eHarmar AL010 Micro Scooter Hitch-Mount Platform Lift\u003c\/h2\u003e\n\u003cp\u003eThe AL010 Micro is an exterior hitch-mounted lift for a compatible scooter weighing up to 135 lb. A keyed switch and toggle control power the platform up and down; after unloading, the empty deck folds manually against the vehicle. The listed setup uses a rear-wheel cradle and four tie-downs to secure the scooter. This is a compact carrier for one unoccupied scooter, not a passenger lift or a fully automatic fold-and-stow platform.\u003c\/p\u003e\n\u003ch3\u003ePosition the Scooter and Secure It\u003c\/h3\u003e\n\u003cp\u003eCheck the scooter's weight and dimensions against the AL010 and confirm that its rear wheel and frame align with the cradle and tie-down points. Place and secure the scooter according to Harmar's instructions before raising the platform or traveling. Verify that the tiller, seat, armrests and accessories do not interfere with loading, the vehicle or the lift's movement. A scooter within the 135 lb limit still needs to fit the carrier and be restrained correctly.\u003c\/p\u003e\n\u003ch3\u003eOperating and Stowing\u003c\/h3\u003e\n\u003cp\u003eThe powered mechanism raises and lowers the loaded platform; the key switch helps control access to lift operation. The empty deck folds manually after the scooter is removed. Plan for that physical step, including reach and balance, and keep bystanders clear of the platform's path. Follow the manual for tie-down tension, electrical connection, operation and travel checks.\u003c\/p\u003e\n\u003ch3\u003eVehicle Fit and Configuration\u003c\/h3\u003e\n\u003cp\u003eConfirm the mounting type, receiver, vehicle ratings and installed clearance before ordering. The lift and scooter add weight at the rear of the vehicle, and the deck changes rear overhang and access when stowed. Check driveway angles, parking and garage clearance with the actual vehicle and hitch. Optional swing-away arms, a battery pack, a plate riser or camera systems are listed separately; verify vehicle-specific fit and which accessories are included in the selected configuration.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eGive the dealer the scooter model, weight and dimensions, vehicle details and receiver information. Confirm the rear-wheel cradle, four tie-downs, wiring and manual-folding operation for the chosen setup. Use the owner's and installation manuals and never exceed the vehicle or hitch manufacturer's limits. The AL010's 135 lb capacity applies to the carried scooter, not the total load the vehicle may support.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587930263603,"sku":"HAR-AL010","price":1445.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/AL050_HARMAR_LIFT_1.jpg?v=1744230294"},{"product_id":"harmar-mobility-al065-automatic-scooter-or-power-wheelchair-vehicle-mobility-hoist-lift","title":"Scooter \/ Power Wheelchair Vehicle Mobility Hoist Lift - Standard Exterior","description":"\u003ch2\u003eHarmar AL065 Universal Inside-Outside Hoist Lift\u003c\/h2\u003e\n\u003cp\u003eThe AL065 mounts to a vehicle's hitch but uses a hoist arm to bring a compatible mobility device into the cargo area. It is designed for manual wheelchairs, small powerchairs and scooters weighing up to 200 lb. A hand control powers the lift; the operator rotates the device manually into position. The two-piece lift can be disassembled for storage. This is different from an exterior platform lift that carries a device behind the vehicle.\u003c\/p\u003e\n\u003ch3\u003eChoose the Docking Setup\u003c\/h3\u003e\n\u003cp\u003eThe selected docking device depends on the mobility device and whether its seat remains on during loading. Current options include a T-bar for seat-off use, a spreader bar, an adjustable C-arm for seat-on use, and a dock for an accordion-folding manual wheelchair. Confirm the device's attachment points and exact docking hardware before ordering. The 200 lb rating is only one part of compatibility; the chosen dock must support the specific chair or scooter as intended.\u003c\/p\u003e\n\u003ch3\u003eVehicle and Cargo-Space Fit\u003c\/h3\u003e\n\u003cp\u003eHarmar lists compatibility with sedans, minivans, SUVs, vans and trucks, but the exact vehicle and hitch must be checked. Measure the cargo opening, floor height, available width and depth, and the path the device follows as it rotates inside. Seat removal, cargo obstructions, docking placement and floor adapters can change the available room. Verify the mounting arrangement and that the lift can complete its rotation without contacting the vehicle interior.\u003c\/p\u003e\n\u003ch3\u003eLoading and Operation\u003c\/h3\u003e\n\u003cp\u003eThe lift raises the unoccupied mobility device under power, after which the operator guides it manually into the vehicle. Consider who will handle that rotation and whether they can safely guide the device through the full movement. Follow the manual for docking, lifting and securing the device before travel. Harmar describes a two-piece assembly that can be taken apart, and says the design can preserve use of the vehicle's backup camera; confirm both details for the actual installation.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eGive a Harmar dealer the vehicle year, make and model, hitch details, cargo measurements, mobility-device model and weight, and whether the seat stays on. Confirm the lift's docking device, floor adapter, installation and operating clearance. The 200 lb device limit does not guarantee a compatible dock or vehicle fit. Review the owner's and installation manuals for the selected configuration.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587934490675,"sku":"HAR-AL065","price":1355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/Harmar-AL065-Inside-Out-Lift.jpg?v=1744230292"},{"product_id":"harmar-mobility-al055-automatic-scooter-or-power-wheelchair-vehicle-mobility-hoist-lift-mirco","title":"Scooter \/ Power Wheelchair Vehicle Mobility Hoist Lift - Micro","description":"\u003ch2\u003eHarmar AL055 Economy Inside Hoist Lift\u003c\/h2\u003e\n\u003cp\u003eThe AL055 is an interior hoist for transporting a compatible manual wheelchair, travel or micro scooter, or powerchair inside a vehicle. Harmar rates it for devices up to 200 lb. The lift raises the device with powered lifting; the operator rotates the boom manually to guide it into the cargo area. The AL055 can be assembled or disassembled for storage. Unlike a platform carrier, it stores the mobility device inside the vehicle rather than behind the bumper.\u003c\/p\u003e\n\u003ch3\u003eMatch the Docking Device to the Mobility Device\u003c\/h3\u003e\n\u003cp\u003eThe lift's docking attachment depends on the device and whether its seat remains in place during loading. Options include a T-bar for seat-off use, a spreader bar, an adjustable C-arm for seat-on use, and a docking device for an accordion-folding manual wheelchair. These fittings are selected for different frames and loading methods. Confirm the exact attachment point and dock for the mobility-device model before ordering; staying below the 200 lb limit does not establish docking compatibility.\u003c\/p\u003e\n\u003ch3\u003eVehicle and Cargo-Space Fit\u003c\/h3\u003e\n\u003cp\u003eHarmar lists compatibility with sedans, minivans, SUVs, trucks and vans, but the installation must be checked for the actual vehicle. Measure the cargo opening, floor height, available depth and width, and the sweep of the boom as it rotates inward. Seat removal, dock location, floor adapters and other cargo can affect clearance. Confirm the floor setup, receiver and mounting position with a Harmar dealer.\u003c\/p\u003e\n\u003ch3\u003eLoading and Storage\u003c\/h3\u003e\n\u003cp\u003eThe powered mechanism lifts the unoccupied mobility device; manual rotation remains part of the loading routine. Consider who will guide the device into the vehicle and whether they can manage its balance and path throughout the rotation. Secure it for travel according to the selected dock and owner's manual. Disassembly can clear cargo space when the lift is not needed, but plan where its components will be stored and how they will be reassembled correctly.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eProvide the dealer with the vehicle year, make and model, cargo measurements, mobility-device model and weight, and whether its seat remains attached. Confirm the docking device, floor adapter, installation, rotation clearance and selected accessories. Review the installation and owner's instructions before use. The 200 lb capacity applies to the carried device and does not confirm a particular vehicle or docking setup.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587936358451,"sku":"HAR-AL055","price":920.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/Harmar-AL055-LIFT.jpg?v=1744230291"},{"product_id":"harmar-al001-universal-carrier","title":"Universal Outside Carrier","description":"\u003ch2\u003eHarmar AL001 Universal Manual Hitch-Mount Carrier\u003c\/h2\u003e\n\u003cp\u003eThe AL001 is a fully manual exterior carrier for a compatible mobility scooter, manual wheelchair or powerchair. Harmar lists a 500 lb device capacity and an oversized platform intended to carry standard mobility devices without modifications to the chair. Because the carrier has no powered lift, loading and stowing require physical handling; consider the user's device, the operator's strength and the loading procedure before choosing this model.\u003c\/p\u003e\n\u003ch3\u003eDevice Fit and Loading\u003c\/h3\u003e\n\u003cp\u003eMeasure the device in its transport configuration, including wheelbase, overall width and length, footrests, tiller or joystick and any accessories. Compare those measurements with the actual AL001 platform and confirm how the device will be positioned and secured. A device under the 500 lb rating is not automatically compatible if it cannot fit or be restrained correctly. Follow Harmar's instructions for loading, securing and unloading, and do not transport an occupied mobility device.\u003c\/p\u003e\n\u003ch3\u003eVehicle and Hitch Compatibility\u003c\/h3\u003e\n\u003cp\u003eHarmar lists compatibility with sedans, minivans, SUVs and vans, but the exact vehicle and hitch still require confirmation. Include both the carrier and mobility device when checking the vehicle's rear carrying capacity, payload and hitch\/tongue-weight limits. The added load and rear projection affect suspension, ground clearance, backing, parking and garage access. Verify the mounting position and clearance with a Harmar dealer before ordering.\u003c\/p\u003e\n\u003ch3\u003eManual Operation and Storage\u003c\/h3\u003e\n\u003cp\u003eThe AL001 does not require an electrical hookup or connection to the vehicle battery. Its manual operation avoids powered lift components, but the operator must perform the loading and stowing steps according to the instructions. When not in use, the carrier can be stored; check the owner's manual for the correct configuration and safe handling of its parts.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eConfirm the mobility-device model, dimensions, weight, securement points, vehicle year\/make\/model and hitch ratings. Ask the dealer to verify platform fit, mounting arrangement and rear clearance for the selected setup. The 500 lb carrier rating is the device limit, not the amount every vehicle can carry at its hitch.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587938390067,"sku":"HAR-AL001","price":1155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/86715_1_13.webp?v=1789658637"},{"product_id":"ez-carrier-ezc-2-fold-up-platform-carrier","title":"Fold Up Platform Carrier","description":"\u003ch2\u003eEZ Carrier EZC-2 Folding Platform Carrier\u003c\/h2\u003e\n\u003cp\u003eThe EZC-2 is a manual hitch-mounted platform carrier with an integrated 42-inch ramp. It is designed to carry a compatible mobility device outside the vehicle; the platform folds upright against the tailgate when empty, using a release pin. Top Mobility lists about 50 lb of lifting effort to raise the empty platform. Because this motion is manual, consider who will fold and stow the carrier as well as who will load the device.\u003c\/p\u003e\n\u003ch3\u003eRamp, Loading and Stowage\u003c\/h3\u003e\n\u003cp\u003eThe integrated ramp folds and locks upright for travel. Follow the product instructions to deploy it, guide the unoccupied mobility device onto the platform, secure the load and return the ramp to its travel position. Keep the area clear of people while the platform moves, and verify that the pin and ramp locks are engaged before driving. When unloaded, the platform can be raised vertically; plan for the stated lifting effort and the carrier's reach behind the vehicle.\u003c\/p\u003e\n\u003ch3\u003eHitch Adapter and Vehicle Fit\u003c\/h3\u003e\n\u003cp\u003eThe EZC-2 requires a hitch adapter selected for the vehicle and receiver. Confirm which adapter fits, how it affects the installed height and clearance, and whether it is included in the selected order. Measure the device's wheelbase, width and total length against the usable platform, then check the vehicle's hitch, tongue-weight and payload limits with both carrier and device accounted for. The added rear projection also affects parking, backing and garage access.\u003c\/p\u003e\n\u003ch3\u003eCapacity and Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe current listing does not state a verified load capacity. Do not infer one from the ramp length, platform appearance or the mobility device's weight. Before ordering, obtain the manufacturer's capacity and compatibility information for the exact EZC-2 configuration and selected adapter. Confirm that the device can be secured and that the carrier, hitch and vehicle are all rated for the combined load.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eVerify the EZC-2 model, adapter, device dimensions, loading path, manual folding effort, securement hardware and vehicle ratings. Optional ratchet straps, a loader ramp, wheel stop and anti-drag wheel are listed separately; check the order configuration rather than assuming accessories shown are included. Follow the installation and operating instructions for loading, stowing and travel.\u003c\/p\u003e","brand":"EZ Carrier","offers":[{"title":"Default Title","offer_id":42587938652211,"sku":"EZC-2","price":1459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/FOLDING-MANUAL-CARRIER-EZC2.jpg?v=1724446265"},{"product_id":"harmar-al225-axis-ii-inside-lift","title":"Harmar AL225 Axis II Double Axis Inside Hoist Mobility Vehicle Lift","description":"\u003ch2\u003eHarmar AL225 Axis II Double-Axis Inside-Vehicle Hoist\u003c\/h2\u003e\n\u003cp\u003eThe AL225 Axis II is a hitch-mounted hoist that lifts and rotates a compatible mobility device into the vehicle's cargo area under power. Harmar rates it for manual wheelchairs, powerchairs and scooters up to 250 lb. The dual-axis movement is fully powered, unlike hoists that require the operator to rotate the boom manually. The lift installs at the hitch but carries the device inside the vehicle; Harmar says the design can preserve use of the backup camera.\u003c\/p\u003e\n\u003ch3\u003eDocking Devices and Vehicle Setup\u003c\/h3\u003e\n\u003cp\u003eThe hitch class and docking device are selected for the vehicle and mobility device. Options include a T-bar for seat-off use, an adjustable C-arm for seat-on use, manual-wheelchair docking devices for different loading orientations, spreader bars and other model-specific docks. Confirm the correct attachment points and whether the seat stays on before ordering. The standard wire harness connects to the vehicle battery; a battery pack with charger is an optional configuration.\u003c\/p\u003e\n\u003ch3\u003eMeasure the Loading Path\u003c\/h3\u003e\n\u003cp\u003eMeasure the cargo opening, floor height, available depth and width, and the device's route as the powered arm raises and rotates it into the vehicle. Harmar lists minivans, SUVs, trucks and vans; actual fit depends on the vehicle, selected hitch adapter, base position, floor type and chosen dock. Adjustable base and arm height and a telescoping boom strap help configure the lift, but they do not replace a vehicle-specific compatibility check.\u003c\/p\u003e\n\u003ch3\u003eOperation, Capacity and Storage\u003c\/h3\u003e\n\u003cp\u003eUse the weather-resistant hand control and follow Harmar's procedure for docking, lifting, powered rotation and securing the unoccupied device for travel. The 250 lb device capacity is separate from the lift's listed 55 lb installed weight; include the lift, mobility device, passengers and cargo when checking vehicle and hitch ratings. Consider who will attach the selected dock and operate the hand control safely.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eProvide the dealer with the vehicle year, make and model, hitch class, cargo measurements, mobility-device model and weight, and seat-on\/seat-off requirement. Confirm the docking device, base adapter, wiring or battery-pack option, installation position and clearance. Review the owner's and installation manuals for the exact configuration.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587956346931,"sku":"HAR-AL225","price":2915.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/AL225_b22d.jpg?v=1744230283"},{"product_id":"xl-heavy-duty-fusion-lift-p2631","title":"Harmar AL301XLHD Heavy Duty Fusion Scooter Or Power Wheelchair Electric Vehicle Lift","description":"\u003ch2\u003eHarmar AL301XLHD Heavy-Duty Fusion Hitch-Mount Lift\u003c\/h2\u003e\n\u003cp\u003eThe AL301XLHD is Harmar's heavy-duty Fusion outside platform lift for larger scooters and powerchairs. Its powered platform uses a 36 x 39-inch aluminum deck, adjustable front and rear cradles that extend to a maximum 53-inch span, and self-tensioning Q'Straint retractors. Harmar rates this HD model for devices up to 400 lb; the lift's installed weight is listed at 102 lb. These limits are distinct: check both the mobility device and vehicle before selecting a lift.\u003c\/p\u003e\n\u003ch3\u003eFit the Device to the Deck and Cradles\u003c\/h3\u003e\n\u003cp\u003eMeasure the device's wheelbase, overall length and width, drive-wheel location, footrests, tiller or joystick, and accessories in travel configuration. Confirm that the wheels sit securely in the adjustable cradles and the retractors reach appropriate securement points. A device can fall under 400 lb but still be incompatible if its frame geometry cannot be supported on the 36 x 39-inch deck or within the cradle span.\u003c\/p\u003e\n\u003ch3\u003ePowered Loading and Securement\u003c\/h3\u003e\n\u003cp\u003eThe AL301XLHD powers the platform's lift and fold operation. Position and secure the unoccupied device using the cradles and retractors as directed, then check that all restraint points are engaged before travel. The powered platform does not eliminate the need to align the device correctly or inspect the restraints. Follow Harmar's installation and operating instructions for the chosen wiring and hitch setup.\u003c\/p\u003e\n\u003ch3\u003eVehicle and Configuration Choices\u003c\/h3\u003e\n\u003cp\u003eThe hitch adapter, wiring method, swing-away, license-plate riser, battery pack and camera options are configuration-dependent. Confirm which are included in the selected order. Check the vehicle's hitch rating, tongue weight, payload and suspension with both the 102 lb lift and the loaded mobility device accounted for. The rear-mounted platform also affects clearance, parking, backing and access to a hatch or tailgate; a swing-away option may help with access when compatible.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eProvide the dealer with the powerchair or scooter model, loaded weight and dimensions, vehicle details, hitch class and wiring preferences. Verify the 36 x 39-inch platform, up-to-53-inch cradle reach, securement arrangement and selected accessories for the exact installation. Do not substitute the standard AL301XL's 350 lb rating for the AL301XLHD's 400 lb rating, or vice versa.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587956543539,"sku":"HAR-AL301XLHD","price":3515.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/al301xlhd-2-600x600.jpg?v=1744230282"},{"product_id":"harmar-mobility-al301xl-automatic-scooter-or-power-wheelchair-extra-large-vehicle-mobility-platform-lift","title":"Scooter \/ Power Wheelchair Vehicle Mobility Platform Lift - Extra Large","description":"\u003ch2\u003eHarmar AL301XL Extra-Large Fusion Hitch-Mount Lift\u003c\/h2\u003e\n\u003cp\u003eThe standard AL301XL is a powered outside platform lift for larger scooters and powerchairs. It has a 36 x 39-inch aluminum deck with adjustable front and rear cradles that extend to a maximum 53-inch span. Harmar rates this model for devices up to 350 lb, and the listed installed lift weight is 102 lb. It is distinct from the heavier-duty AL301XLHD, which has a 400 lb device rating.\u003c\/p\u003e\n\u003ch3\u003eMeasure the Mobility Device\u003c\/h3\u003e\n\u003cp\u003eCheck the scooter or powerchair's loaded weight, wheelbase, width, drive-wheel position and any parts that extend beyond the frame. The device must fit on the 36 x 39-inch deck and sit securely between the adjustable cradles. Confirm that the retractors can attach at the intended securement points. Being below the 350 lb limit alone does not establish fit.\u003c\/p\u003e\n\u003ch3\u003ePowered Lift, Fold and Restraints\u003c\/h3\u003e\n\u003cp\u003eThe Fusion lift powers platform movement and folding. Load and secure the unoccupied device using the cradles and self-tensioning Q'Straint retractors as directed, then confirm the restraints and platform are ready for travel. Follow Harmar's operating instructions for loading and travel checks; powered movement does not remove the need for correct device alignment and securement.\u003c\/p\u003e\n\u003ch3\u003eHitch, Vehicle and Accessories\u003c\/h3\u003e\n\u003cp\u003eHitch adapter and wiring options are selected for the vehicle. A swing-away arm, plate riser, battery pack or camera system may be added separately; confirm compatibility and included components for the chosen configuration. Check the vehicle's hitch\/tongue-weight limit, payload and suspension with the lift's 102 lb installed weight and the mobility device included. The rear-mounted lift affects clearance and access to a tailgate or hatch, especially if no compatible swing-away option is selected.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eProvide the dealer with the vehicle year, make and model, hitch details and mobility-device model, dimensions and loaded weight. Confirm the 350 lb capacity, platform\/cradle fit, wiring, mounting class and optional accessories. Keep the standard AL301XL and AL301XLHD ratings separate; use the model specified for the device's weight and dimensions.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587956609075,"sku":"HAR-AL301XL","price":2985.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/HARMAR-AL301-XL_e1b3.jpg?v=1744230280"},{"product_id":"trilift-scooter-platform-free-carrier-p633","title":"TRILIFT Platform-Free Mobility Carrier","description":"\u003ch2\u003eTriLift Platform-Free Mobility Carrier\u003c\/h2\u003e\n\u003cp\u003eTriLift transports a compatible scooter or power wheelchair outside a vehicle without a conventional platform deck. Its lift unit raises a triangular receiver, which engages a matching bracket mounted to the mobility device. The device must have the correct bracket installed and be positioned accurately for the docking connection to engage; this is a different loading routine from driving onto a platform and securing the device with straps.\u003c\/p\u003e\n\u003ch3\u003eLift, Device Bracket and Hitch\u003c\/h3\u003e\n\u003cp\u003eThe system is configured from a lift, a device-specific docking bracket and a suitable vehicle receiver. Lift models, bracket styles and hitch options vary, including choices for scooters, power wheelchairs and manual wheelchairs. These pieces are not interchangeable by appearance alone. Confirm that the exact device can accept the correct bracket and that the selected lift and receiver match the vehicle before ordering.\u003c\/p\u003e\n\u003ch3\u003eCapacity and Vehicle Limits\u003c\/h3\u003e\n\u003cp\u003eThe listing publishes loading capacities from 160 to 450 lb across different TriLift models. Capacity belongs to the selected lift configuration, not to the family as a whole; compare the mobility device's complete loaded weight with that model's rating. Also check receiver and vehicle limits, including the added load and leverage at the hitch. The product page calls for a compatibility check with both the vehicle and mobility unit.\u003c\/p\u003e\n\u003ch3\u003eLoading and Storage\u003c\/h3\u003e\n\u003cp\u003eThe lift lowers its docking point near the ground so the device-mounted bracket can be aligned and engaged; the vehicle powers the lift mechanism. The platform-free design avoids a deck to store, but successful use depends on correct bracket placement, alignment and clearance behind the vehicle. Confirm the operating space, device approach and access to the lift controls at the intended parking location.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cp\u003eProvide the vehicle year\/make\/model, hitch details and exact scooter or wheelchair model when checking compatibility. Confirm the lift model, docking bracket, receiver option and applicable load limits as one complete system. Do not select from the 160-450 lb family range without verifying the rating for the exact configuration.\u003c\/p\u003e","brand":"TRI LIFT","offers":[{"title":"Default Title","offer_id":42587959558195,"sku":"Trilift","price":2142.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/trilift-carrier-scooter.jpg?v=1724448070"},{"product_id":"harmar-mobility-al425hd-axis-ii-heavy-duty-mobility-hoist-lift","title":"AL425HD Axis II","description":"\u003ch2\u003eHarmar AL425HD Axis II Fully Powered Inside Lift\u003c\/h2\u003e\n\u003cp\u003eThe AL425HD is an interior hoist lift for loading a compatible mobility device into a truck cargo area. Harmar describes the Axis II as providing powered lifting and rotation, and rates the heavy-duty AL425HD for devices weighing up to 450 lb. Harmar specifies this HD model for trucks only; it is not the same vehicle-fit claim as the standard AL425. Confirm the exact truck and mobility device with a Harmar dealer before ordering.\u003c\/p\u003e\n\u003ch3\u003eChoose the docking device for the chair\u003c\/h3\u003e\n\u003cp\u003eTop Mobility lists several docking arrangements, including a T-bar for a seat-off application, a C-arm for a seat-on application, a spreader bar, and a docking device for a folding manual wheelchair. These are not interchangeable universal attachments. The correct setup depends on the chair frame, its configuration and how it can be secured. Confirm the selected docking device against the exact make, model and seating setup of the mobility equipment.\u003c\/p\u003e\n\u003ch3\u003eCheck the truck and cargo-area fit\u003c\/h3\u003e\n\u003cp\u003eAn inside lift has to fit the vehicle as well as the chair. Before choosing an AL425HD, verify truck compatibility, cargo-area dimensions and clearance for the lift's powered movement and rotation. Harmar recommends working with a trusted dealer to select a lift for a specific vehicle and mobility device. Vehicle-specific mounting and configuration should be confirmed by the installer; do not assume that an available docking option establishes fit on its own.\u003c\/p\u003e\n\u003ch3\u003eConfigure before checkout\u003c\/h3\u003e\n\u003cp\u003eThis product is highly customizable. The listed configuration may include accessories such as a battery pack, wireless remote or driver-side arm offset, depending on the order. Ask a mobility specialist to confirm which components are included, the correct docking device, vehicle compatibility, installation requirements and any needed options before placing the order. Keep the mobility device within the 450 lb rating and follow Harmar's installation, operating and maintenance instructions.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42587977056307,"sku":"HAR-AL425HD","price":4690.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/Harmar-036-Harmar-AL425HD-Product-by-BAP_hpr.jpg?v=1744230277"},{"product_id":"harmar-mobility-al100hd-heavy-duty-automatic-scooter-vehicle-mobility-platform-lift","title":"Scooter Vehicle Mobility Platform Lift - Heavy Duty","description":"\u003ch2\u003eHarmar Mobility AL100HD Heavy Duty Automatic Scooter Vehicle Mobility Platform Lift:\u003c\/h2\u003e\n\u003cp\u003eThis robust vehicle mobility lift is designed to accommodate scooters with a wheelbase up to 42 inches, offering a seamless and fully automatic platform carrier for effortless operation. Featuring an automatic docking arm, it securely fastens the scooter to the lift, ensuring safe and stable transport.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e400 lb. lifting capacity\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esupports a wide range of heavy-duty scooters without compromise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e26\" x 39\" aluminum deck\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith an adjustable cradle that extends to 46\" for versatile scooter sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstalled weight of 83 lbs.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eallows for easy handling and installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\" to 18\" hitch height compatibility\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eguarantees fitment with various vehicle models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic docking arm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eprovides secure attachment of the scooter to the lift platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompared to other models on the market, this Harmar Mobility AL100HD Heavy Duty Automatic Scooter Vehicle Mobility Platform Lift stands out with its superior lifting capacity and user-friendly automatic features. It surpasses industry norms by combining durable materials with an innovative design that simplifies scooter loading and unloading.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42594568994867,"sku":"HAR-AL100HD","price":2805.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/harmar_al100-sns_down-plate_1_1_693248f1-4da5-44e0-af31-c5565743de51.jpg?v=1744230264"},{"product_id":"harmar-mobility-al100-automatic-scooter-vehicle-mobility-platform-lift","title":"Scooter Vehicle Mobility Platform Lift - Standard","description":"\u003ch2\u003eHarmar Mobility AL100 Automatic Scooter Vehicle Mobility Platform Lift:\u003c\/h2\u003e\n\u003cp\u003eTransporting your scooter without a reliable lift can be frustrating and unsafe, often leading to wasted time and risk of damage. This challenge disrupts your routine and limits your mobility options, especially when you need quick and secure access to your scooter on the go.\u003c\/p\u003e\n\u003cp\u003eThe Scooter Vehicle Mobility Platform Lift - Standard is designed to eliminate these hassles by providing a fully automatic and convenient solution for carrying your scooter. It ensures effortless loading and unloading, so you can focus on your journey.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e350 lbs. lifting capacity\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esupports virtually all small to mid-size scooters, offering versatile compatibility for most mobility devices.\u003c\/li\u003e\n\u003cli\u003eIts\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e27.5\" x 39\" aluminum deck\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith an adjustable cradle extends up to 46\", securing your scooter firmly during transit for a smooth ride.\u003c\/li\u003e\n\u003cli\u003eThe lift features an\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eeasy-to-use docking arm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethat safely secures the unit to your vehicle’s 5\"-18\" hitch height, enhancing stability and peace of mind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTrusted as the most popular outside scooter lift, it exemplifies dependable performance and is proudly made in America, reinforcing quality and reliability.\u003c\/p\u003e\n\u003cp\u003eUpgrade your mobility with the Harmar Mobility AL100 Automatic Scooter Vehicle Mobility Platform Lift and enjoy seamless transport of your scooter wherever life takes you.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42594569027635,"sku":"HAR-AL100","price":2305.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/harmar_al100-sns_down-plate_1_8d6145a8-a5ea-4803-8eb3-b018eae3656b.jpg?v=1744230262"},{"product_id":"rv-fusion-lift-p773","title":"Harmar AL300RV Camper\/RV Fusion Scooter or Power Wheelchair Electric Vehicle Lift","description":"\u003cul class=\"productBullets\"\u003e\n  \u003cli\u003eCarries virtually all scooters AND powerchairs\u003c\/li\u003e\n  \u003cli\u003e4 - Self-tensioning QStraint retractor straps\u003c\/li\u003e\n  \u003cli\u003eDrop Hitch Adapter standard (adjustable up to 26\" hitch height)\u003c\/li\u003e\n  \u003cli\u003e350 lb. lifting capacity\u003c\/li\u003e\n  \u003cli\u003e26\" x 39\" adjustable cradle extends up to 46\"\u003c\/li\u003e\n  \u003cli\u003e 82lb. installed weight\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42594569224243,"sku":"HAR-AL300RV","price":2895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/harmar_al300rv-sns_down-plate_2_5d3c99f9-a387-4ab6-9f30-f077d33e6b00.jpg?v=1744230260"},{"product_id":"harmar-mobility-al300-automatic-scooter-or-power-wheelchair-vehicle-mobility-platform-lift","title":"Scooter \/ Power Wheelchair Vehicle Mobility Platform Lift - Standard","description":"\u003ch2\u003eHarmar Mobility AL300 Automatic Scooter Or Power Wheelchair Vehicle Mobility Platform Lift:\u003c\/h2\u003e\n\u003cp\u003eStruggling to transport your scooter or power wheelchair with ease can disrupt your daily activities and limit your independence. Traditional lifts often require manual effort and can be unreliable, causing delays and frustration during your travels.\u003c\/p\u003e\n\u003cp\u003eThe Scooter \/ Power Wheelchair Vehicle Mobility Platform Lift - Standard offers a seamless solution designed to make loading and unloading effortless. This fully automatic carrier simplifies mobility, enhancing your convenience every time you hit the road.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe rear wheel cradle supports a lifting capacity of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e350 lbs.\u003c\/strong\u003e, ensuring stability and security for your mobility device.\u003c\/li\u003e\n\u003cli\u003eIts adjustable cradle expands from\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e26\" x 39\"\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eup to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e46\"\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith an aluminum deck, accommodating various scooter and power wheelchair sizes.\u003c\/li\u003e\n\u003cli\u003eEquipped with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efour self-tensioning restraint retractors\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand a docking arm, it guarantees a secure hold and safe transport on every trip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsers consistently highlight the lift’s reliability and ease of use, making it a trusted choice for those who depend on their scooters or power wheelchairs daily.\u003c\/p\u003e\n\u003cp\u003eUpgrade your vehicle with the Harmar Mobility AL300 Automatic Scooter Or Power Wheelchair Vehicle Mobility Platform Lift to experience hassle-free mobility support that fits your lifestyle perfectly.\u003c\/p\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42594569289779,"sku":"HAR-AL300","price":2555.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/harmar_al300-sns_down-plate_2_344c8d07-0dc5-497c-9d97-1b3ca7201e5c.jpg?v=1744230257"},{"product_id":"harmar-mobility-al300hd-automatic-scooter-or-power-wheelchair-heavy-duty-vehicle-mobility-platform-lift","title":"Scooter \/ Power Wheelchair Vehicle Mobility Platform Lift - Heavy Duty","description":"\u003ch2\u003eHarmar Mobility AL300HD Automatic Scooter Or Power Wheelchair Heavy Duty Vehicle Mobility Platform Lift:\u003c\/h2\u003e\n\u003cul class=\"productBullets\"\u003e\n\u003cli\u003eCarries virtually all scooters or powerchairs\u003c\/li\u003e\n\u003cli\u003eFully automatic platform carrier\u003c\/li\u003e\n\u003cli\u003e4-Self-tensioning QStraint retractor straps\u003c\/li\u003e\n\u003cli\u003eLarge aluminum deck 26\" x 39\" adjustable cradle to 46\"\u003c\/li\u003e\n\u003cli\u003eCarries Heavy Full Size Scooters as well as Medium to Micro\u003c\/li\u003e\n\u003cli\u003e400 lb. lifting capacity\u003c\/li\u003e\n\u003cli\u003eInstalled Weight 82 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Harmar Mobility","offers":[{"title":"Default Title","offer_id":42594569322547,"sku":"HAR-AL300HD","price":3115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/harmar_al300-sns_down-plate_3_75134948-e7c6-4170-a324-6be03ded6fb9.jpg?v=1744230256"},{"product_id":"wheelchair-carrier-hold-n-go-nbsp-automatic-scooter-vehicle-mobility-platform-lift","title":"Hold N' Go","description":"\u003ch2\u003eWheelchair Carrier Hold N' Go Automatic Scooter Vehicle Mobility Platform Lift:\u003c\/h2\u003e\n\u003cp\u003eTransporting mobility scooters can be cumbersome and risky without the right equipment, often leading to inconvenience and potential damage during travel. This challenge affects daily routines and limits freedom for those relying on mobility devices.\u003c\/p\u003e\n\u003cp\u003eThe Hold N' Go Wheelchair Carrier Hold N' Go Automatic Scooter Vehicle Mobility Platform Lift offers a reliable and effortless solution for securing and transporting scooters safely and efficiently.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold down arm design\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eensures stable support for 3 or 4-wheel scooters with a minimum 7\" wheel size, enhancing security during transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350 lb. weight capacity\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eaccommodates most mobility scooters, providing versatility for various models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic folding mechanism\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esimplifies storage by folding the platform up automatically when not in use, saving space and effort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch box and manual crank\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eoffer easy operation and manual backup for convenience and reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsers consistently praise the Hold N’ Go for its robust build and ease of use, noting how it improves their travel experience with dependable scooter transport.\u003c\/p\u003e\n\u003cp\u003eChoose the Hold N' Go for seamless scooter mobility—secure your device confidently and enjoy hassle-free transportation every time.\u003c\/p\u003e","brand":"Wheelchair Carrier","offers":[{"title":"Default Title","offer_id":44000403193907,"sku":"US218","price":1995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/files\/e4e68d_155876c3af2742dd9d769a5082dc926f_mv2_d_1797_1437_s_2.avif?v=1769614888"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/7128\/5555\/collections\/scooter_all_banner.jpg?v=1740594544","url":"https:\/\/www.topmobility.com\/collections\/scooter-lifts.oembed?page=3","provider":"Top Mobility","version":"1.0","type":"link"}