The E-Z Carrier EZC-1 None Folding version, allows for your total mobility transporting at the most economical value possible. This wheelchair or scooter Carrier is designed for those who wish to take their mobility scooter or power wheelchair on trips but do not have the room to put the scooter in their car, van or SUV.
This carrier works on vehicles with ground to hitch height between 12" and 14"
This scooter carrier's 36 inch ramp allows for your total mobility transporting at the most economical value possible.
The simple yet functional design requires no batteries, motors or actuators.
Simply unfold the ramp, load the scooter or wheelchair, fold up the ramp, strap and go!
Available for Class II (1.25" & 200 lbs. capacity ) or Class III (2" & 400 lbs capacity) Hitch Receivers
Carrier 28"X 50"
Ramp 27" X 42" long, single fold
Platform size 28" X 50"
3" security rail
Carrier weight: Class II -74 lbs. and Class III - 72 lbs.
Weight capacity 400 lbs
Powder coated for a lasting finish (baked on paint) black in color
Virtually maintenance free
All-steel platform simple installation instructions
Product Weight: Class II -74 lbs. and Class III - 72 lbs.
Lifting Capacity: 400 lbs for class III, 200 lbs for class II
Platform Size: 28" x 50"
Ramp Size: 27.5" x 42 " Single Fold
Side Rail: 3"
Finish: Powder coated
Hitch Height: 12 to 14 in.
Hitch Type: Class II* or III*200 lbs. maximum scooter weight if using Class II hitch mount.** Product may be shown with optional accessories
This product is warranted to be free from any defect in materials used in the manufacture, and/or workmanship at the time of its manufacture.
The manufacturer's warranty period is One (1) year unless otherwise specified at time of sale.
- CUSTOMIZE & BUY